Hello Jeff, Going to echo Mark. I stayed at Blue Haven Marina for 2.5 months, was only going to stay 2 to 3 weeks because of the price, but the marina was so nice, the only 5 star marina I stayed in

Jeff, You have twooptions. It depends on how much money you want to spend. The lower price optionis Turtle Cove at $0.85 per foot per day for the monthly rate or Blue Haven at $1.75per foot per

I am curious if there is anyone that has kept a log of engine turbo performance under way? My 54 has the Volvo D3-110 engine. I regret that in the past I have not recorded the turbo boost pressure at

Yes, I can confirm Martin is correct, it is a H6 Autoprop on the 54. Bob Gallivant Amel 54 #31 currently at St. James Island, USVI

Good Morning Amelians, I'm looking for recommendations on where to pick up a slip in Provenciales. I see there are a couple of options. I plan to slide down there in a month, and leave Spirit there

An interesting thing that either I forgot or was never told on our '55 visits, but which came up on this week's '55 demo to the Delos crew, is that Amel installs that boat's hydraulic autopilot pump

Thanks Martin. I put my pants on one leg at a time, too! The great thing about this group is the great willingness to help each other. This is of great value to us all. Thanks again, Martin Joel F.

Hello Everyone. I am far away from an Amel boat today and my failing memory cannot recall which model of Autoprop is on the Amel 54. Can anyone help me out with the Bruntons Autoprop Model Number

Jose, I have never put a hydraulic drive in a SM2K, but have installed and used them on other boats. They are easy to install, relatively. The key being they need to have someplace VERY strong to

Duane, Good question... I actually spread cement on the male connector, and then slide the hose on while the cement is still wet. double clamping immediately. It does take some time to dry, and

Bill, One last question on using contact cement to join the unbarbed connections. Do you spread it on both surfaces and allow it to become tacky before joining as usual? Usually contact cement bonds

If it's a Raymarine rotary drive it is quick (on the Santorin) to remove - just two bolts, and then you can unbolt the casing and see the gear arrangement. You can then turn the motor or the gear

I have two sets of questions: 1) My rotary drive has failed. I makes sounds as if it is receiving the signal but the wheel does not turn. Is it a failing clutch? If that is the problem can it be

Thanks James! I appreciate your input.

Awesome follow up, Bill! I have so far been happy with the performance of the CS4500 in my system. It is very nice not having to clean a paddlewheel after a day or two of sitting! Bill Kinney SM#160

Thanks for the info Joel. I couldn't remember whether they were there or not for sure Interesting that they cracked through the 2014/15 repair already. Not much point in fixing them if they just

Alan, Willem, and other interested owners. I spent most of the day talking to various B&G distributors about substituting the Airmar 4500 for a faulty Sonic Speed sensor. Almost half of them told me

Wow ! Impressive explanation! Always learning! As always THANKS Joel for your input! Sincerely, Alexandre --------------------------------------------