My boat has the Eberspacher D5 diesel heater...which does not work. I got to thinking about it since lately it would be great to have the "fresh air ventilation" setting functional so we could

Firstly a big THANK YOU to all in this group. My first post after a long time lurking, soaking up your knowledge and wisdom. You make being part of the Amel family very special. I have a 1989 Maramu

We use an "HP Officejet 150 Mobile All-in-One" printer. It was expensive, but it is very compact and fits on the small shelf we have to the right of the navigation desk. It is battery powered (like

Thank you for all your answer regarding Air Conditioning! I will try with capacitors before change the unit. Rafael SM2k246

Update & Solution: NB: There is a flaw in the S3G that Raymarine issued a technical update for. Dan Gerhardt diagnosed the problem with my S3G Course Computer. There was a flaw in the programming

Thanks for your response Bill. We will update the group once this job has been done. BR Soraya & Thomas -- GARULFO Amel 54 #122 Cap d'Agde, France

Hello, Can anyone tell me the size prop and rudder anode used on my 1987 Maramu? Also, if there are any other anodes on this model that I should be replacing, please let me know. My boat has the

I read that once the bottom plate is removed that the wires and light slip out with a slight tug on the wires. I also read that the new LED plastimo bulb is not compatible with the older non-LED

Thanks, Ross. That is the RIGHT thing to do because there are people out there who will patch unsafe boats and sell them without disclosure. I am familiar with more than one Amel that this has

too far & too late (finished refurbishing) for me but hope you will find someone eager to recondition or cannibalise the boat. understood the concern, just hoping to see you on return to the 'nomads

guess not many 'Merry-Go-Rounders' (the buoys) Amel owners who applied for a rating; found one Super Maramu on Osiris (french = for ORC or other systems. To get an idea of the time allowance (or

The only sure way to know if this is the cause would be to look at your DC output from the alternator with an oscilloscope. Perhaps you have a bad diode pack in the alternator allowing AC ripple on

This is the exact replacement for an Amel 54 washer. http://www.ubaldi.com/electromenager/lavage/lave-linge/bosch/lave-linge-frontal-bosch--wlx24460ff--240803.php CW Bill Rouse Admiral, Texas

Thanks Bill - it seems to be the source of my problem, we run the engine without the alternator and the water maker worked perfectly. Anybody an idea why this happens and how it can be cured? We

Ross, Sorry for your misfortune. Why do you state 'non-repairable'? I've seen a lot worse properly reconstructed to be fully functional and safe, but who knows. Your thoughts please. Bob

The most likely cause of the compressor not starting is a bad start or bad run capacitor (or both). This will cause the compressor to fail to start or to run inefficiently and overheat. It may cause

A small front loading common brand printer with a flatbed scanner will have hundreds of uses. HP is a common brand worldwide. CW Bill Rouse Admiral, Texas Navy Commander Emeritus Amel School

I suspect that your 24VDC alternator is creating serious RFI (radio frequency interference). RFI will effect electronic circuits and devices, sometimes in strange ways. CW Bill Rouse Admiral, Texas

Good morning Ian, Glad the problem is now solved! Have a great day, sincerely, Alexandre --------------------------------------------

Likewise, I spent the big bucks and went with HP portable printer. It's so convenient to just drag it out of the drawer, turn it on and print via Bluetooth from the laptop or even the phones.