Exactly what I expected, and for the reason I imagined. :) The Autoprop blades have a couple more "degrees of freedom" than other feathering props! Bill K

Thomas, I have the EasyView right to the switch of the onan switchboard. This year they have a new version which connects to USB for programming. I have the grey version and no color display and

Mark, You are correct. The zinc has separated from the brass bolt. I’m going to investigate things a little further when we get back on the boat tomorrow, I think it is sound advice to remove the

Thanks Eric

On Kristy, the new MaxProp fit almost perfectly on the old shaft used for the AutoProp, There was less than a mil in a couple of spots that were trimmed on the MaxProp by a prop shop to make a perfect

Thanks Peregrinus, I omitted that I mentioned that (the lack of mode and the potential need to setup the charger with a constant voltage output) to the UK guy and he basically said not to bother as

I have SM 243, Chris. What is your boat's hull number? Kent karkauai "at" yahoo "dot" com +1 828 234 6819

Bill R: Do you know what modification was made to the C-drive to accommodate the Autoprop? I am guessing the output shaft was lengthened... Bill K, Yes, I know...the C Drive case was modified to

Every SM came standard with two props, since having a spare was required for the Class Certification. A feathering prop was installed as the standard working prop on all boats, I believe, and a fixed

Chris, Be careful...early model Amel Super Maramus will not accommodate AutoProp. The C Drive was modified for an AutoProp to fit. Best, CW Bill Rouse Admiral, Texas Navy Commander Emeritus Amel

Mark and Denise! Congratulations!! I am sure you will be thrilled with your new Amel! I have to agree with you guys on your opinion of Bill: I too share it. Bill came for 4 days and despite a good

Hi Pat, Call me at 828-234-6819 Kent

Hi Chris, Yes, I still have it, and yes, I will sell it to you. It needs servicing (routine maintenance). What engine do you have? Congratulations on your new SM! Please contact me at karkauai "at"

Hi Kent. Will you be on board over the July 4 weekend? If so I might stop in to see you. Mike Ondra SV Aletes SM#240 Rock Hall, MD 610-442-7551

Hi Denise, Mark, Congratulations! We hope to see you on the Bay soon. Please contact me or Marina if you need any help. Have a good sail home. Vladimir Sonsev SM #345 S/V "LIFE IS GOOD"

Thank you Paul! We were trying to get that fridge/freeze out a couple of years ago to change the insulation. But gave up, we never found thoses bolts from the liquer cabinett and thought that someone

Congratulations and I share all your remarks about Bill Rouse and Olivier! Keep going. Peter Forbes 00447836 209730 Carango - Amel 54 #035 In Hurricane cradle Spice Island Marina - Grenada

Hi Bill; It may be that the solenoid and the type of physicalconnection (pipe size, male/female, etc.) have different numbers and they usethe same solenoid with different connections based on

Hi Kent, I have been searching through the forum about propellers and saw a recent post that you made regarding the Auto Prop. The vessel (SM224) which we are in contract to purchase next month only