Mark Not sure about accelerator but maybe a possibility. I am using tool improperly per your comments. I'm holding it closer to vertical than horizontal. This is causing paint to drip out. I'll

John I'm using exactly the paint and tool but with flattener. My need to forgo the flattener. Ben Driver La Bella Vita SM #3476S

Hi Ben, Do you think anaccelerator would help? https://www.jamestowndistributors.com/userportal/show_product.do?pid=98105&familyName=Quantum+99+Urethane+Accelerator I am not sureyou need to

Hi Mark I'm painting deck stripes using Beugler tool Ben Ben and Gayle La Bella Vita SM #347Sent from Yahoo Mail for iPad

Ben Are youpainting the deck stripes or boot stripes? With bestregards, Mark Skipper Sailing Vessel- Cream Puff - SM2K - #275 Currentlycruising - Grenada www.creampuff.us

Hi Ben, I'm using Interlux Brightside one step polyurethane with just a tiny bit of thinner. It works great in the Beugler tool. I did purchase flattening agent but am only using it for the touch up

Hi Ben, We just painted the rubbing strake on our Santorin Liesse using single part poly paint and the flattening additive, applied 3 coats by brush, since we changed the color and no drips but it

It's time to repaint my stripes. I'm using an available interlux poly-urethane paint. My problem is paint is too thin and dripping from roller on striper. Can anyone recommend a thickening agent?

Hi Jay, I have a spinnaker you can have for the price of shipping. Where are you? Contact me personally at: Kent Robertson S/V Kristy SM243 Currently St Michaels, MD, the spinnaker is in NC karkauai

Hi Duane; I'm not sure which model of the frigoboat you have. We had asimilar issue a few days ago on one of our refrigerators. Ours is an FM W 50Fmodel with variable speed compressor and water

Greg Shea, Thanks so much for the information, this is a really big help to us. We can now justify packing the tool and the Sailrite fasteners into our overstuffed luggage! It is interesting

Duane, We had a similarissue and found the door to be out of adjustment. Bill Rouse has posted aboutusing a dollar bill to check the seal. I put our spotlight inside the fridgeand closed the door.

James, We used Sailrite fasteners on the new side curtains on our Sharki of the same vintage as your Maramu. I had the same concerns as you but they worked fine. Greg Shea Sharki 133 Cap des

We've been having higher temps in the Frigoboat refrigerator recently, over 50 degrees F. We have already pulled the unit out and cleaned the heat exchanger, and; made sure that all air supply

Hi Amel Owners, I am looking for used spinnakers or code zeros for my mango. I am assuming that SM sails would also fit. If anyone is looking to sell sails please reach out to me. I am also wondering

James, I don't know how much detailed familiarity you have with Amels, but we'll be cruising in New England on our SM in the coming weeks if you wanted to see one up close and personal. Ours is most

Good morning John, Sorry you have to go through this… especially with a split system… Good luck! Sincerely, Alexandre --------------------------------------------

Hi James Pure Magic was built in 2004. She will be for sale from the beginning of August. Regards Peter S/V Pure Magic 433

Age and crew issues have combined to force the sale of my 1976 Amel Meltem. Experienced blue water cruiser with 2 circumnavigations under her keel. Sound, solid vessel. Lightning strike in June,

Peter - What year is your Super Maramu, and do you still plan to have it for sale this month or next? I’d be interested to hear more about it. James