Our lopolight masthead unit failed after 2 years and was changed by Amel.Last year my back light failed and I replaced it and will now send to lopolight. I saw that in previous lopolight production

Hi Dean, The hydra 3000 on our boats are not connected to the compass of the Furuno Navpilot- perhaps to keep the system simple.So I also have heading off. Wolfgang Weber SY Elise Amel 54 #162

Dean - Of the previous 10 calls I worked on that where electronics that were not working properly.... 9 of them were a bad connection. Only one was a faulty transducer. Start from the control unit

Just a follow up regarding the Lopo LED Nav lights. I contacted Lopo and they have sent me a new LED bow light free of charge. All I had to do was provide the serial number, which is printed on the

Hi All, I'm trying to track down a fault whereby my B&G Hydra 3000 system is not receiving heading data. When I look at heading it just reads 'off'. According to the manual this means it is not

Hi again. If the shaft is seized the safe option ie not destroying the gear box, is heat from a big blow torch. A professional size torch, not a toy. Regards Danny SM 299 Ocean Pearl Sent from

Hi Mike. Anti seize grease??. Since I began using lanacote I have had no problems. Lanacote is a lanoline product. (Obviously) Regards Danny SM 299 Ocean Pearl Sent from my Vodafone Smart

Wow Mike, I replaced my worn origional gearboxes and had no problem with the outhaul shaft. My plastic mounting spacers look a tad fragile for the bottle jack anyway. Now the mail furler shaft was

So after replacing the outhaul gearbox destroyed during our effort last year to remove the "drive shaft" I was most careful top apply anti-sieze grease. Even so I could not remove the shaft with

So it appears that the picture attachments worked. Couple of other notes. The ¼” gap between the chrome trim and the wood threshold of the companionway could easily be filled with a black caulk

We found a pretty good replacement for the weather seal on the sliding companionway hatch on the SM2000. Belt Weatherstrip/Window Scraper Seal from Rockauto.com part no. 1371-4X2. 2 48" pcs cost $29.

Bill, I know that you are a "believer" and one of the great owners of a Super Maramu. Some day somebody else is going to own that Super Maramu and they will be very glad that you had her for a

Thanks Bill I'll check in with a local rigger and see if there is something similar that might do the trick. The broken bit is supposed to slip into a hole on the inboard end of the main /large pole.

Hey Bill - Glad you are safe after that crazy storm in Texas. I am a big advocate of buying original parts. I have sent Dessalator an email requesting the correct kit for my model. Trident silicon

Bill, Here is a snarky comment from "you know who." It is not meant to be to you, but to rather anyone who would make the risk of buying these O rings from anyone but Dessalator. Yes, Dessalator does

I always love when these threads come up. Anyone familiar with the older "Dessalator, serie Amel. Modele Depose"? I would love to renew my "o" rings. Everything is working properly however there is a

Hello Gang, I need to change the UV panels on my sails. The sail are in VG condition as the PO hardly used the boat after new sails were added. Does anybody know the dimensions of the sails so we can

Hello, Thanks to all for your input on this topic. This may interest those of you currently in Europe looking for filmtec SW30-2521 membranes. inaqua.de as recommended by Robin does provide them at a