Go to the FILES section and find "Running Rigging Measurements Super Maramu French & English.xls," or click on this link for a direct

Ken, I had no problems with quality and fit from Tri Radial cut Hydranet from QSails. If you added the option of a foam luff on the genoa from any sailmaker, the foam luff reduces/eliminates wrinkles

Dear Duane, I have bought a cleaning kit for use when I return to Antigua. I suggest you visit revive turbo cleaner.com click on how to use where all will be revealed. Simples? Patrick CARAMELLE

Hello, If you happen to have the information at hand or have recently replaced yours, could you please let us know the recommended length for the Halyards and Genoa sheet? Many thanks Soraya & Thomas

The Yanmar Service Manual shows a task "Wash Turbocharger blower" but does not give any recommendation on how to do that. The interval is 250 hours. I found the product "Yanmar Blower Washer" in 1

I've had similar problems on my current SM bought at them. At the time of purchase I required a set of jobs. I waited twice of the time and then I had to do these again almost

We used IGo and PredictWind and found it very user friendly and the service from PW is second to none. The time to download depends on How large area you want and How much info you are asking for. We

Bill, This is interesting... You didn't go for the unlimited data plan ? What was your reason ? I gather you are downloading the email routing files from Predict wind as attachments?? Typically how

Ken, I can certainly understand the anxiety of getting new sails, it is a big purchase that we have to live with for a long time. Since my previous post on this subject, Emrah Oge has contacted

Thanks Paul and James, Still looking forward to receiving the new Qsails in two days, but no doubt a bit worried in light of your posts. My hope was to get STOCK AMEL SIZED and CUT SAILS, no changes.

There is another version on Facebook from when they did it back then as well. It’s different and has a surprise for cruising fans. https://www.facebook.com/svdelos/videos/753897944778378/ Brent

Cameron, We use an Iridium Go that we got through Predictwind as part of our weather package. We have been very happy both with PredictWind and the Iridium Go hardware and service. We like the

Hi All, Not sure if someone has already posted this. If they have,please forgive the repetition. The Delos crew travel to France to tour Amel.The content is light but gives a great perspective of

Hello Cameron, Have you tried After Sales Service at Amel?? Here is their address’ SAV (at) Amel (dot) com. Ensure you quote your boat name, type and hull number. Include photos of the component

Good afternoon, My son and I, Sharki #97, are looking for some assistance from the forum. We need to replace the rollers at the end of the booms on the main and mizzen booms. Can the forum please help

> On 1 Oct 2017, at 1:04 pm, Cameron Burness <cameronburness@...> wrote: > > All, > As I mentioned previously my son and I have recently bought an Amel Sharki, #97, 1984. > I am looking at our

Thank you the fridge is now loose, thanks to Bills book and photos from Trillium. A fantastic forum, would have spend a lot of time to figure it it by myself. Now I can use the time enjoying an old

Paul, I sent you a private email. Best, CW Bill Rouse Admiral, Texas Navy Commander Emeritus Amel School http://www.amelschool.com 720 Winnie St Galveston Island, TX 77550 +1(832) 380-4970

It wasn't the dishwasher...here's his post:

Paul, Paul on Trilliium posted photos of removing his freezer (fwd of the dishwasher/island under the salon table settee), just search in photos. I recall there was a hand wheel nut accessed by