Excellent Info! thank you! Porter Porter McRoberts S/V Ibis: Amel 54-#152 Ft. Lauderdale www.fouribis.com portermcroberts@...

For all our fellow SMers in South Florida area, we've looked everywhere and finally found a master key maker that duplicated our companionway key. ACE hardware off 17th St. In the Harbor Shoppes

James, How do you lay out 100 meters of anchor chain on deck for rinsing and drying without beating the deck all to hell? I haven't ever figured out a way to do that. When I had a local fiberglass

Craig, I agree with Alan's point and before we sold BeBe I had decided to place 6 of the Blue Sea 5191 MRBF Terminal Fuse Blocks with a removeable Blue Sea BS5185 (150A) amp fuse on each of the 6

Me too, although I own a Sharki only but some informations are even usefull for me. Gerhard

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the amelyachtowners group. File : /Onan Genset Information/Onan Parts Manual

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the amelyachtowners group. File : /Onan Genset Information/Service

Well, whatever spin you want to put on it, Alan's point that the battery cables should be protected close to the batteries, before they run through the boat and pose a fire hazard, is a good one.

Alexandre, Speaking for all of us, I am sure. Thank you so much for your guides. We have used them over the years and they are a GodSend. So well documented and instructions are so thorough and

Kent, The bow lockers on our boat and the chain locker were also very wet and heavily mildewed when we bought the boat. They now stay almost completely dry but it takes a little effort. All

Hi Alexandre, Thank you for the extensive job with your guidelines and manuals. I hope you're doing better now. Keep in mind my previous offer and ring bell anytime ;-) Fred S/V ScentStone

Hi Steven, I am also Dutch but live in USA. Have retained Bill ROUSE for an AMEL currently in the South Pacific. I can attest that retaining Bill is money well spent; he will send you

Hi Steven, if it is the one I looked at 2yrs ago it needs a good survey and a very solid plan of action. Happy to pick up with you off line. Dan Carlson, SM 387, sv BeBe

Good afternoon, I just finished a “crude” page on http://nikimat.com with links to most the Illustrations I did, plus Owner Manuals, etc. Toward the bottom you will see “Parts for sale”. For

I echo the comments of others on this topic. My wife and I are in the process of purchasing an Amel presently. We initially looked at Amel SM2000’s without the help of anyone with expertise with

I am a new owner of SM #440 Cara (July 2017). I second Mark's comments: 1. Get a surveyor who knows Amels. I used Olivier Beaute for two separate surveys and can't recommend him strongly enough.

I Steven, I second Mark's suggestions. A surveyor who knows Amel and Bill Rouse consulting will go a long what to keep you out of trouble. Joel Potter also is a good resource. Depending on

Hi Mark, I´ll keep that in mind. I´m Dutch and looked at a 53´´ In Holland. Thanks for your input. regards, Steven

Dear Colin, Thanks for your reply, I´m happy for you that you keep on sailing. Hopefully we´ll meet some day and thanks for letting me know that I may contact you in the future for advice

Steven, Get a good surveyor,one that knows Amels. There are plenty mentioned on this forum. Call Bill Rouseand get him involved. This will be money VERY well spent. (I’m assuming you arein