Hi all, following this discussion and seeing all of the references to the GPM output to the pumps, but no one is talking about the pressure. I don't know how accurate the gauge is on my AMFA pump

Warren, I have bought Sharki #80 build in 1982 in April this year and I'm still working on it to make it a little bit better. There are two systems to make warm water and this is not state of the art

Hi Bill, Hope you and Karen are well. After getting our iridium Go and reading your post, we decided to start with the same package as you (rather than unlimited) and see if it meets our needs. It

On the subject of hot water, we have only cold on our 1980 Sharki. Can anyone show me where and how the hot water tank would be set up on a Sharki? It would be great to have a hot

Hello fellow Amelians. We have been cruising the west coast of Thailand/ Malaysia for some time now and have no desire to cross oceans. We have been offered a 4 week boat swap with a friend who has

This is a new topic. Posted here because of bad connection from boat. I am looking for someone to join me (and one other person) on Ladybug from Bermuda to Antigua and then on to Martinique. I will

Hi James, I had a Perkins 4108 which had a leaking injector pump. 2 indications of a fault was the engine oil pressure dropped and the oil level rose on the dipstick, confirmed by diesel parts in

Christian Alby, Thank you for the details of what happened to your engine, perhaps it will help me avoid the same fate with my engine in the future. I hope that you can find the rest of the

Hi Mark, I didn't keep the accumulator of the AMFA pump, just removed the whole thing and replaced by the Whale. I didn't notice any delay in the arrival of water… Of course the pump feeds as well

My anemometer stopped turning and after rescuing it from the top of the mast, I decided to replace the bearings. That didn't work out so well, because the lower housing (part no. 213-10-038 in the

My dishwasher works very well and has done so for many a year. Why, I even sleep with her. Best Regards Barry & Robyn Tradewinds III SV #171

Good evening to you thanks for the tip on oïl pumps; will inquire to keep my adress book updated. I just found one pump with a Perkins dealer in France who keeps parts for engines on tractors & earth

We didn't use the dishwasher, so we removed it to free up the storage space. Duane Wanderer, SM#477

Christina Alby, Sorry to hear about the damage to your Perkins 154. There are currently oil pumps listed on Ebay that are supposed to fit the 4-154 but they do not look like the same pump as in

Fred, Did you keepthe accumulator tank? Or, does the tank remove the need for one? With bestregards, Mark Skipper Sailing Vessel- Cream Puff - SM2K - #275 Currentlycruising –

Hi, I can add another piece of information to this thread. I replaced the AMFA by a Whale pump Ref : FW1225 Whale Watermaster 3.0 GPM, 24 V d.c which was really easy to install including the

We used the dish washer not to often. It was a help when we had friends on board and a lot of dish to clean. We are always surprised how fast the dish washer cleans the dish. The washing machine on

We use the washing machine but the dishwasher is replaced by a freezer Paul on SY Kerpa SM259

Thanks that's good info that it will do two sets of sheets!!!! On Nov 3, 2017, at 8:39 PM, Ann-Sofie Svanberg kanalmamman@... [amelyachtowners] <amelyachtowners@...> wrote:

Hi Miles, Just wanted to add that when we opened and cleaned our water tank , on our 1980 Maramu, we found it to be made of coated steel ..?? Just by way of information . All the best Andy SV