Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the amelyachtowners group. File : /Airmar CS4500 Ultrasonic Speed/CS4500

That was my experience exactly which is why I went down the route of installing the Airmar CS4500 Ultrasonic xsdcr. Cheers Alan Elyse SM437

Hi, I have been having problems with the B&G sonic speed log for a while now. I've tried replacing the board (where the transducers connect to), and checked the resistance on the transducers which

Thank you Alexandre, I met George this morning, it’s probably best if you contact him direct at Startek.george@..., his full name is George Bridget. He asked if you had any other spares so you

No. Hardly an expert. The crossing is different every time. Hence the request from the field of experts. Re Parker. Certainly a guru. I do get his spot forecasts, as already spending the 500 on

Hello Duane, I “had” the Calpeda B CM 20E pump on the boat (now under water). But I still have many parts for the whole air conditioning system: calpeda rebuilt kit, capacitors, etc. Here is the

Hi Alan, I've just seen your picture on the FB page and would like to thank you for sharing your experience at fitting the Airmar CS4500 Ultrasonic speed transducer in the depth sounder location

Strangely our original Amel fitted B&G sonic speed unit worked perfectly till our boat became marina bound for 5 years, with just occasional weekend short sails. Now that the boat is used daily again

Thanks Eric, I'll check with them. Duane

Thanks Bill, glad to hear you're back in the water! Duane

The number that several experienced mechanics have given me is that a well cared for (key words, there) marine diesel will get to the point it needs an over haul between 6 and 12 thousand hours.

They work fine together with the separate control units. I find that when any source opens up and the pressure falls, both pumps kick on. If the demand can be satisfied by one pump, then the other

Hi Porter, So I hope you subscribed to Chris Parker's Weather Service - then again, if you've made 12 of these crossings you are probably the uber expert! Fair winds, Craig SN#68 ---In

I did find an email from Bill Rouse for the Calpeda. =========================================================== Eric and all, I just spoke with Maureen at Coastal Climate Control. She gave me this

Alexandre, Do you have the Calpeda B CM 20E pump? I thought I had a link to your spare parts inventory but I can't find it now... I'm in the USA, and will be leaving in the next few weeks, can you

Eric, I googled Applied Automation and: Applied Automation Is Now Closed To New Business Ever since Applied Automation was formed in February 1990 we have worked tirelessly to provide the best

Hello Patrick, Ok putting it aside. I am asking for 80% of what I paid. From memory (and I will check on my invoice from Amel) it was the same as the Bow Thruster joystick. For small invoice PayPal