I have a number of thoughts, but my primary thoughts require some questions: Where are you measuring the battery voltage? Was the new battery tested before you installed it? What brand, model, AmpHr

When thegenerator runs, I see 13,6V on the starter battery. When I turn theignition key of the engine in the cockpit the current goes down to 13,2V (maybe because of theventilator in engine room /

Thank you alexandre, your address is correct pjn.mccallin@... if this fails try Elaine :- Nemo.jersey@... please try again. Am just getting Elaine to send me a message just in case? Her test message

Lieber Wolfgang, Ganz herzlichen Dank! Werde es sofort testen

Under the gipsy is a little magnet 4-5 mm , sealed by silicone. This was rusty and destroyed on our boat. As we had no replacement on board , I changed the gipsy from the second windlass to the

My chain counter stopped working, no more pulses! I want to check it, but I can‘t find it. PLEASE HEEEELP! Martin AMEL54 #149 CHIARA currently Le Marin, Martinique

Good morning Patrick, I tried to email you directly to: pjn.mccallin@... but twice I received an error message... Can you email me directly at uster@... Sincerely,

Hi Alan, Thank you for the extensive documentation about the Sonic Speed replacement. Highly appreciated by many of us ;-) Kind regards Fred S/V ScentStone SM2K #375

Great Doc Alan Thank you Dominique Guenot s/v Viva currently in Fiji Call Send SMS Add to Skype You'll need Skype CreditFree via Skype Call Send SMS Call from mobile Add to Skype You'll need Skype

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the amelyachtowners group. File : /Airmar CS4500 Ultrasonic Speed/17-263-01

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the amelyachtowners group. File : /Airmar CS4500 Ultrasonic Speed/CS4500

That was my experience exactly which is why I went down the route of installing the Airmar CS4500 Ultrasonic xsdcr. Cheers Alan Elyse SM437

Hi, I have been having problems with the B&G sonic speed log for a while now. I've tried replacing the board (where the transducers connect to), and checked the resistance on the transducers which

Thank you Alexandre, I met George this morning, it’s probably best if you contact him direct at Startek.george@..., his full name is George Bridget. He asked if you had any other spares so you

No. Hardly an expert. The crossing is different every time. Hence the request from the field of experts. Re Parker. Certainly a guru. I do get his spot forecasts, as already spending the 500 on

Hello Duane, I “had” the Calpeda B CM 20E pump on the boat (now under water). But I still have many parts for the whole air conditioning system: calpeda rebuilt kit, capacitors, etc. Here is the

Hi Alan, I've just seen your picture on the FB page and would like to thank you for sharing your experience at fitting the Airmar CS4500 Ultrasonic speed transducer in the depth sounder location

Strangely our original Amel fitted B&G sonic speed unit worked perfectly till our boat became marina bound for 5 years, with just occasional weekend short sails. Now that the boat is used daily again

Thanks Eric, I'll check with them. Duane

Thanks Bill, glad to hear you're back in the water! Duane