I made two assumptions that are perhaps incorrect: I assumed that the lights share a buzzer via a pair of diodes at the helm, thus if a light is on, the buzzer is also on; and I assumed that the

We installed the Atlantic Towers arch three years ago. Been very satisfied with it. But like others, not comfortable with the lateral sway. Using mostly standard rail hardware and a length of 1" SS

Hi, With those tall arches and the tendency for sway I would be concerned about the stress on the fiberglass where the mountings are attached. That sway would translate into considerable lever action

Hi Chuck, on SM 299 the bow thruster has sensors clamped to the ram that lifts and lowers the thruster. These need to be properly positioned. The clamps can be loosened and the (little oblong black

Most of the Jabsco 'designated' bilge pumps of this type such as their belt driven bellows/diaphragm models range from 3.5 to 8 gpm. I think my current model is around 5 gpm. I'm betting the

Ok a bit more clarification trying not to repeat myself. When the helm command is disconnected the ram can be lowered and raised directly from the power supply in the BT compartment. All three sensors

Hi Mark, I just added an Atlantic Towers arch with solar on the arch. I added 4 150watt panels. The supports for the panels sold by Atlantic Towers didn't work with my panels and new supports were

I'm happy with 300ft of G40 10mm chain. When I replaced the 15 year old chain (200ft) I added another 100ft. The added weight seems to improve motion when hard on the wind in a sea (less slamming).

Hello, We need to make some changes to our swimming platform. Has anyone needed to/managed to separate the two pieces of fibreglass either side from the stainless steel frame? These seem to be glued

I also might be interested, depending upon the cost. James S/V Soteria SM 347

Bill, On my Santorin the house and start battery negatives are all connected but the bar.. Why would this be wrong? It gives me a reading for the separate batteries on my Mastervolt. Ian Ocean Hobo

I installed an almost identical configuration as Mark did on Trillium. An Atlantic tower arch, davits, solar mounts with two LG310 watt panels from Platt

The answer to your question, Eric, is no. Ian, that bar connects all of the house batteries, not the start battery. Best, CW Bill Rouse Admiral, Texas Navy Commander Emeritus Amel School

Thanks Ryan, I am not on the boat right now. The boat is new to me as well. Let me see if I have the workflow correct. When command 'up' the H light is off as ram is moving and lights when ram is in

Good morning Crew, it would appear I may be up for a new Battery Charger. Any recommendations on make and model? I am looking along the possibility of a Victron Centaur Charger 24/60 unit. Product

Thank you Patrick, Count me in for a spare "box of tricks". Maud told me the same thing. "No longer made". The circuit board seems a simple layout for the electrically inclined among us (not me). This

Good evening Chuck, assuming it’s the box of tricks not the limit switches, whilst I cannot help by way of providing you with a new box, a short while ago I contacted Olivier asking if he would

Mine does, a copper bar connecting all negatives. Ian Ocean Hobo SN6

If the control system is acting like the thruster is already down, I'd suspect whatever sensor determines it is in the down position, not the controls/relays. You already said your up-sensor was not