Hi Chuck Count me in My Santorin is 1991 vintage John Hayes Nga Waka Wellington New Zealand

Duane Do not know how much it reduce the flow, but we added a similar filter and filter all the freash water. We have not notice any problem at all with the water flow, we have a Jabsco par 5

Does the same box exist on the 54! If so count me in too. Thanks! Porter 54-152 S/V Ibis Ragged Islands, Bahamas Excuse the errors. Sent from my IPhone Www.fouribis.com

Hi Bill, Have to agree with you. No bilge pump of a size you could fit in a boat would deal with water coming in from a hole in the hull. Anyone who has in water swapped or removed for cleaning a

Of potential interest to 54-ians with a Dometic dishwasher. We had an issue with it, leaking heavily and showing error code 10 (issue with the water intake, as per the manual). The problem was that

I’m not sure I have the same box but if I do, I’d like to keep aspare since they are now unavailable. Can someonepost a picture of what we are talking about, please. With bestregards,

I had a boss once whose favorite line was, "Show me the data." I learned a lot from him... Ratings are all fine and good, but the real world can always change things. So I just timed how long it

I'm planning on adding a charcoal filter prior to the watermaker to remove chlorine. As long as I'm adding it, it seems reasonable to filter all the fresh water for the boat. Does anyone have an

Hi Ryan, Have you checked the hinges, Danny SM 299 Ocean Pearl

I too would join in a group order for a spare bow thruster control box. Derick Gates SM2K#400 Brava Currently on the hard in Bailey's boatyard, Falmouth Harbour, Antigua

Bill, Thanks for the confirmation on the duckbills being nitrile in the Sealand pump. I suspect that this pump would be great for pumping the sump. What is you opinion about the capacity of this

Bill, Its been about four years since I installed mine and I think they gave a range to preload , say three to five inches . Not knowing better I chose midway four inches , I wish I had made it

Good morning all. I am having a problem with my D3 volvo. There was a near lightning strike and the CPU was fried among other things. Now no one can seem to program the new CPU has anyone else had

The only rubber in the T-series pumps in contact with pumped water are the joker valves. The sealand joker valves (they call them "duckbill valves") are made of nitrile rubber, which is good for oil

Danny, When I installed mine I added a larger G10 backing plate and dug out almost all the balsa core under the feet and replaced it with heavily thickened epoxy. This has the dual benefit of

One of the things you need to do when installing the Atlantic Arch is to be sure you "preload" the structure. They do mention this in their instructions, but if you talk to them they REALLY emphasize

Steve, Sorry to read about the fit problems with the Emek arch. I wanted to make you aware that there is a pretty easy solution in dealing mounting pad fit issues if they are not too severe. The

Hi all, My SM has the wooden floor panels, not the blue ones. A while after I bought the boat in the beginning of August, I noticed the smoothly-opening floor panels that run the length of the saloon

Danny, The mounts are articulating , so any movement transferred to the mounts is not directly transferred to the deck. I installed a diagonal s.s tube to stiffen it up and I don't think at the top

The arch attaches to the deck through "mortise and tenon" type fittings. The small amount of side to side movement doesn't stress the fitting that is bolted to the deck. Kent S/V Kristy Hi, With