Excellent Duanne, Glad it was as simple as the sensor !!! Sincerely, Alexandre --------------------------------------------

Thanks Bill for the photo and everyone for the suggestions. Ian Townsend Loca Lola II SM153 George Town, Exuma

Hi Miles, We mounted the reverse osmosis and the high pressure pump in the engine compartment. We located the feed pump in the port cockpit lazarette, down by the fresh water heater. We had to

Our boat came with a "custom made" hatch prop. A 1"x2"x10" piece of unfinished teak. Inserted longwise it held the hatch wide open, edgewise just a bit open, and laid flat just a crack. Even though

I made 3 different-length props with pvc pipe and rubber table leg ends 5/8" dia. A second set for the dodger window allows me to crack it open for air when the traveler is moved to port. I don't

Ian, Attached Best, CW Bill Rouse Admiral, Texas Navy Commander Emeritus Amel School www.amelschool.com 720 Winnie St Galveston Island, TX 77550 +1(832) 380-4970

or use chop sticks

No need for a special holder; just tighten the large Allen key situated on… opinion… the port side of the hinge. Works like a champ. Jean-Pierre Germain SY Eleuthera, SM 007

I have been told there is a special AMEL device/fixture that will prop the aft cabin hatch open. We can't find one on board so we would like to make one. Would anyone have a photo? Ian

I could not find the small capacitors with leads attached, also the other two need to fit in the white box. They are round, most of the ones I have seen on the market are oval or are of a different

A fellow Amel owner here in GA loaned me one of his spare sensor and bingo! The sensor was the problem and now I'm looking for replacements. Maud on Friday said she would let me know on Monday if

JAMES, Capacitors are generic items and there is no reason to buy them from Climma. Check capacitors ratings. It should be written on the capacitors. Order online in any electronics supply

I also just bought a Clima 12 there. Amazing price. And great service. Porter Excuse the errors. Sent from my IPhone Www.fouribis.com

That is also where I bought mine. Sincerely, Alexandre --------------------------------------------

I installed an Aquabase watermaker in the engine room. The pump went on a small platform besides the battery compartment and the main unit is wall mounted at the port side of the engine room as far

In the USA Coastal Climate Control info@... Fair Winds Eric Kimberlite Amel Super Maramu #376

Hello everyone. Can anyone recommend a source for replacement capacitors for the Climma Compact 9 AC units on the SM2000? Thanks! James Soteria SM2000 #347

Thanks all for your various advice. I have the unit reassembled. As my milling machine is in Dublin I used my timber thicknesser, which I have here in France. I removed about 1.3mm and this gave

Hi there I have recently ordered a schenka watermaker. It comes in two parts. The pump and the Reverse Osmosis unit. The pump needs to be <2m from the skin fitting and the RO unit closeish and lowish

Sorry, but my last response was a mistake! I should not have pressed the send button. It seems I‘m getting too old for a fast reply. All the best Dieter Sharki #135 Fal-lera Von meinem iPhone