My raft is in the port cockpit locker, right next to the Jordan drogue. Both inboard. My raft is a 6 person SLOP Winslow and very light weight. Fair Winds Eric Kimberlite Amel Super Maramu #376

Hi Eric, I know you've been there. Until you've been in one you just can't imagine the size the waves get to. We are fortunate to have avoided any storms in Ocean Pearl but I got caught in a full on

I talked with Paul at Bamar USA Friday. Paul forwarded the letter below, I told him Iwould send it out to all interested parties on the A O G. With the interest generated from the Amel OwnersGroup

That makes 3 of us. I cannot imagine a rail mounted raft surviving a 40 or 50 foot wave crashing over our stern. Fair Winds Eric Kimberlite Amel Super Maramu #376

Hi Ian and Judy. you and me too. Danny SM 299 Ocean Pearl

James, That sounds familiar so is just what I need. I replaced the oil pressure sender a couple of years ago and looked the purchase up in my records, but unfortunately the unit I bought came with

James, That sounds familiar so is just what I need. I replaced the oil pressure sender a couple of years ago and looked the purchase up in my records, but unfortunately the unit I bought came with

Would anyone know the name & manufacturer if possible OR the gelcoat color code number for the 54?? Thanks in advance. Mark & Debbie A54 #68, S/V Brass RingFt. Lauderdale

Thanks I checked but yes it was on Sent from my Verizon, Samsung Galaxy smartphone

Inverter under navtable is on?

Hi all we got back to our boat last night and our TV lift in the main saloon is not working I'm wondering if maybe I'm not doing something very simple. I do have on 230 all of the 24 volt outlets and

hi All, For what it's worth, two of the most experienced sailors I have ever come across , one owning a Swan 57 with over 100,000 miles experience, the other having competed in the same boat in

James, That sounds familiar so is just what I need. I replaced the oil pressure sender a couple of years ago and looked the purchase up in my records, but unfortunately the unit I bought came with

Dave, My Maramu is #220 and I am using 5/16” Teflon impregnated packing. Would anyone with a Perkins 4.154 be able to tell the thread size for the engine block oil pressure tap? I am wanting

Thanks Pat, That's reassuring. The Navico (B&G, Simrad etc) housing recommends max 1 7/8" hull thickness.I'm guessing that your B&G transducer housing is the same as mine. Cheers Alan Elyse SM437

I would use PU caulk similar as when caulking teak deck more UV stable both Sika and 3M have high quality PU sealer Paul on SY Kerpa SM 249

Hi Bill, I replaced mine with white silicone sealant several years. They seem to work just fine. Regards, Miles S/Y Ladybug sm 216, Martinique

Good afternoon Amonn, Finally time to write down about the ladder. Mine was under water, I found and removed it, it is now cover with barnacles. When I have time I will clean it. Are you still

Bill, I think that your idea of using the silicone might be the best idea. The filled (Grey as opposed to the clear) Dow Corning 3145 stands up for a long time to the UV in my experience. The

We’re off the boat so hopefully someone in the group can answer a quick question. What size shaft packing do I need: Maramu, original shaft size and packing housing? Thanks in advance! Dave