adding a fuse to the PCB on the bowthruster is quite simple. I added one to the + wire on the pcp in a small fuse holder. Fair Winds Eric Kimberlite Amel Super Maramu #376

Hi , If you are around Wednesday, Thursday or Friday, we will be in Martinique on Kimberlite. Ponton 4. Please drop by Fair Winds Eric Kimberlite Amel Super Maramu #376

Thanks Craig. That's reassuring to hear you say that about the 3300 hrs on the Volvo, because there are many other nice upgrades on the 1999 I am attracted to. And sounds like the rigging

Very exciting, Paul, and early welcome to the DB. Can't really say anything about the specific boats, of course, but, in general, 3300 on the Volvo should not be an issue if it's been well maintained.

Hoi Philipp Thanks for your note, good to know rhat Wilson looks OK. We are planning our next trip to LR. Could you fix the instable warm water flow? Fair winds Peter SY Wilson, SM 003, La

Wow, Herbert, that sounds very good, indeed. Yes, there are many options to the old legacy designs running at fixed (and inefficient) rpm that give quiet(er) operation, better fuel economy, cleaner

Hello all, I just registered with this group because, after careful consideration of several bluewater yacht brands (we are past Pacific Seacraft owners), and time spent as crew on a Super Maramu, we

Mark, Congratulations! This is really very good news for All SM owners that have electronic sensors on their bow thrusters. If I still owned BeBe, I would buy one today for several reasons: 1.) The

In an odd coincidence, I was working on a making a replacement PCB for the Bowthruster Linear Actuator before Duane made this post. I didn't want to say something about it on the forum until I

Thanks everyone! It seems like I have been thinking this was going to be a nightmare of a project but "should" be pretty simple. I love the longer bolt option! Hopefully, it really is as simple as

Can someone tell me about if the OEM thru-hull fitting for the Airmar depth sensor is a 51mm housing? Mine is marked D800-P498 on the tag attached to the sensor wire, and "20-386-02" is printed on

Craig, we have an Fischer Panda 4000i with a 1 cylinder kubota engine, 4kw. Initial it had fixed RPM ~2900 but two years ago I upgraded it with a variable speed option (step motor that pushes the

I have the same issue, Oliver advised me to drill a new hole and thread it as the mild steel plate is rather large so just drill a new hole besides the old one, or drill a larger hole and thread that,

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the amelyachtowners group. File : /markb1.jpg Uploaded by : mfmcgovern

Although I've not had to do it aboard, I have previously had to re-tap a hole like this. I drilled it to the next size and tapped it, then inserted a "Heli-Coil" thread insert to bring it back to

I had what I thought was a similar problem. I used a longer fully threaded bolt and all has been fine for years. Fair Winds Eric Kimberlite Amel Super Maramu #376

Hey all - Wondering if anyone can shed some insight on the SM rudder bonding setup. I've seen the diagrams however, if anyone has experienced or repaired what I am about to describe it would be

Thanks Alex!

Mine was only a capacitor. But try first to press longer/harder on the button. If you speak German you can contact the Austrian person, he has spare parts (if you don't speak German, you can use