Thank you everyone for helpful comments. Just to close this post off, we can report that Amel have been extremely helpful to us. They did not have any SM53 bowthruster units in stock, but given our

David! Hello. We’re over in the IWW Marina. Provisioning and deciding on new sails. Looks like you’re wearing out your Visa card!! Went to FKG yesterday. Looks like a serious outfit!! What wind

David, I was looking at the DX900+, which does depth and speed as well but is electromagnetic. I finally called Airmar and talked to them about it, and the gentleman told me it would not fit in the

Hi Porter, Where are you? We are in anchored the lagoon, Dutch side, awaiting our standing rigging, which we are doing with FKG. Plus a host of other projects kicking in while the masts will be

Hi John, Lagoonies was, in essence, undamaged. The machine shop behind Lagoonies is up and running, as is the sail loft above. Cheers, David Perigee, SM#396 Sint Maarten

Greetings Duane, I used the Airmar DST800 NMEA2000 version, plastic; it was a direct drop-in replacement for existing depth-sensor (located in bilge outside the FWD head). Downside: paddle wheel =

Shelter Bay Marina across from Colon, Panama is a well-run facility that can haul an SM. Kent S/V Kristy karkauai@...

I’m here now and will have a look John. And agree with David. This place is amazing! They have everything! Porter. Excuse the errors. Sent from my IPhone Www.fouribis.com

Thanks James. I'll try her Kind regards Danny SM 299 Ocean Pearl

Thanks Craig, I'll try her. Kind Regards Danny SM 299 Ocean Pearl

Thanks Alan, Northland Spars and rigging in Opua have done satisfactory work for me in the past. I am just canvasing the options and the Acmo one appeals if the price is right. Kind

David, Which depth speed temp sensor did you install? I'm doing the exact same project right now. Just finished another day of chasing down wiring! Duane Wanderer, SM#477

David, Which depth speed temp sensor did you install? I'm doing the exact same project right now. Just finished another day of chasing down wiring! Duane Wanderer, SM#477

Hi David, thanks for the update. We are headed that way....slowly taking our time though the Bahamas at the moment. By any chance would you know the status of the machine shop behind Lagoonies?

Dimitris, Yes, you can just unplug the ethernet chord that connects the FAX-30 to the Hub 101 (unplug it from the Hub), and then plug it into an ethernet port on your computer. Before you will

Dear group, We have replaced our 5x analogue B&G instruments at the helm with 3x Triton2 units - very happy so far. Also, replaced the analogue depth sounder with a digital (NMEA 2000)

Pat, we have good experience with Shelter Bay Marina in Panama. nice and safe herbert SN120, Kali Mera, Shelter Bay

We are presently working up our STORM PLAN for staying in the Caribbean this Hurricane Season. No place is 100% safe. This situation is complicated this year, because some of the Lloyds underwriting

Hi Pat, We just just spent a couple of months in Panama, and have now moved on to Hawaii. The marina at Shelter Bay near the canal entrance on the Caribbean side has a good secure long term storage

Curacao marine in curacao or shelter bay I was in Curaçao this summer and no problem For 6 months I think it's the best solutions JP SM ARAMIS