Hi Jose, see my original post under your question below. Bottom line from the SKF engineer, inner seal facing oil, two outer ones facing the water. Use MUCH harder metal for the bearing than Amel

On my Amel 54 #14, it was G7. Not sure if all Amel 54 were so equipped but on my boat, also our demonstrator for North America, all the “ included at base price outfitting “ was to be

Hi all, Count me in for some SWAG again. We had over 20 people for the last Chesapeake Rendezvous Ric Bali Hai SN24 Annapolis From: amelyachtowners@... [mailto:amelyachtowners@...] Sent:

This is a question for Bill mostly but anyones opinion welcome: I want to replace the original 10mm chain provided by Amel. I do not know if it is Grade 4 or 7. Maud does not know, but the original

Thank you, Craig, That makes sense. What did the SFK expert tell you about the orientation of the seals? Good winds Jose

HI John, I just replaced one of my under seat units. If was easy just like Mark said it was. I did have someone in Le Marin do the bending with a jig he had used before. In my case, I replaced the

Hello Everybody. The sooner some foresighted member picks a time and place, the better equipped we will all be to arrange our calendars around the date. Last time was fun. All The Best,

Denise and I would love to join in. Mark McGovern SM #440 Cara Deale, MD USA

Hi Kent, Sounds good - we'll be up late Sept after we get back form Borneo. Cheers, Craig and Katherine - hi to Captn Iris!

We are planning to be there in mid summer and would be interested in a Rendezvous.

Diane and I would enjoy getting together again , the last one was fun , I think we had about seven or eight boats. Pat SM Shenanigans

Hi to all, Aletes is also back from Martinique, to be in the Chesapeake for the summer, Rock Hall on the Eastern Shore. We would certainly be up for a get together. Tom Peacock Aletes SM #240

We are interested in getting together this Summer. Our boat is on a hard in Herrington Harbor now. Vladimir SM 345 "LIFE IS GOOD"

Vladimir, Thanks for the offer and I am glad that you did find the oversized rivets. I don’t think that I want to use the flush heads because I don’t want to cut away any metal for the

Ha! Thanks Mark, yes I am planning to purchase from Go2Marine. My evaporator and thermostat look like they are in good condition. I thought about the whole package but since the quick connections

Hi Steve, How do you include a photo into text on this site? Fair Winds Eric Kimberlite Amel Super Maramu #376

Thanks Steve. On May 8, 2018, at 6:15 PM, Stephen Morrison steve_morrison@... [amelyachtowners] <amelyachtowners@...> wrote: I will take a few photos and some measurements and email them

Sounds like a good product, Pat. Let’s get together. Anybody else on the Chesapeake (or anywhere else) want to have an Amel Rendezvous this Summer? Kent Robertson S/V Kristy SM243 karkauai at

John, We replaced ourunits a couple of years ago. I would also suggest you replace the evaporatorunit at the same time giving you an entire new box ready to last another 20years. The evaporator

John, We replaced ourunits a couple of years ago. I would also suggest you replace the evaporatorunit at the same time giving you an entire new box ready to last another 20years. The evaporator