main@AmelYachtOwners.groups.io

Re: [Amel Yacht Owners] Re: Drawer/cupboard pulls

I'd be interested in a couple. I also have a friend who works at a company that does 3D printing of stainless steel and titanium. I will see if I can convince her to make these; they might be better

By Ryan Meador · #40595 ·

Re: [Amel Yacht Owners] Re: Drawer/cupboard pulls

Ken, I would be in for 5 spares if you have them printed. Thank you Jose Ipanema SM2K 278 Constitution Marina Boston, MA

By Jose Venegas · #40594 ·

Re: [Amel Yacht Owners] Re: ball valve on outlet of holding tank replacement

When I was doing holding tank hose work, I found a hairdryer (conveniently provided by Amel, I believe) pointed into the hose did a good job of making it flexible. If you're trying to remove it, you

By Ryan Meador · #40593 ·

Re: [Amel Yacht Owners] Re: Drawer/cupboard pulls

Very goid. Yes I need the chrome handle part.

By John Clark · #40592 ·

Re: [Amel Yacht Owners] How to flush Volvo D3-110i-C

Hi all, I thought I'd post a follow up on this for those who are interested. I pulled a 3:1 solution of BB through the engine and let it stand for 24 hours. Result: problem solved, engine temp is back

By ya_fohi · #40591 ·

Re: [Amel Yacht Owners] Volvo temperature sensor

Hi bill; I had the same issue with the pressure switch in our Volvo. If you go through any Volvo dealer, even the main factory they will give you the part number for the non-isolated ground part

By Mohammad Shirloo · #40590 ·

Re: [Amel Yacht Owners] Re: Diaphragm Bilge Pump failure.

Hi again Alan, Just an update on getting my AMFA bilge pump fixed. I got the part from Amel, cost with VAT and shipping was US$270. I have put it back together and now at least I am not hand

By Barry Connor · #40589 ·

Re: [Amel Yacht Owners] Batteries for Amel 54

Thank’s Bill, I really appreciate you taking the time to explain this to me. When I purchased the 13 batteries I was not told the difference and bought on price thinking that I was getting a

By Barry Connor · #40588 ·

Re: [Amel Yacht Owners] Re: ball valve on outlet of holding tank replacement

Hi. I've had no trouble unscrewing the valve. The hardest part is the hose. Trying to bend it enough to go on. Need to find ways to heat it to soften it.. Recommend new hose while you are at it. I

By Danny and Yvonne SIMMS · #40587 ·

Re: ball valve on outlet of holding tank replacement

Hi Mark Craig and Gary, I've ordered the valve, it should be here next week. My only remaining fear is that the valve is stuck, frozen onto the embedded nipple in the hull. I'll start with

By Peter de Groot · #40586 ·

Re: ball valve on outlet of holding tank replacement

Hi Mark, Craig and Gary,

By Peter de Groot · #40585 ·

Re: ball valve on outlet of holding tank replacement

Peter, Mark recommends a Bronze valve (by Groco, although many other brands are out there) - these are NOT brass and are excellent! Gary recommends "Naval Brass" or "Marine Brass". These also are

By Craig Briggs · #40584 ·

Re: [Amel Yacht Owners] SM stern bumper

Contact Amel France. The bumpers go in and out of stock. Ifthere are none available now, check back in a couple of months. With bestregards, Mark Skipper Sailing Vessel- Cream Puff -

By Mark Erdos · #40583 ·

Re: [Amel Yacht Owners] SM stern bumper

The guys at our Marina in Virginia got us a replacement from Amel last summer in a couple of weeks. We don’t know the cost because the previous owner had it replaced after our survey of the boat. It

By Mark Garver · #40582 ·

Re: [Amel Yacht Owners] CLIMMA AC on AMEL 54

Hello friends, Seems , that I am really a unlucky guy and CLIMMA is not as bad as my experience. Thank you ALL for your willingness to share YOUR experience. Now I have to reflect........ Fair

By luvkante · #40581 ·

Re: [Amel Yacht Owners] Volvo temperature sensor

Thanks Pat! It does always help to check the Perkins parts. When available, and a match, they are almost always cheaper... Bill Kinney SM160, Harmonie Annapolis, MD, USA

By greatketch@... · #40580 ·

Re: [Amel Yacht Owners] Volvo temperature sensor

Thanks Bill R., It does look like all the VDO temperatures sensors are electrically identical, and all I have to do is be sure the threads match the thermostat housing. Interestingly, the 1/2"MPT

By greatketch@... · #40579 ·

Re: [Amel Yacht Owners] Volvo temperature sensor

Bill Kinney, I think what you need is a VDO Isolated Ground sensor. I believe that almost any diesel engine isolated ground sensor will work. Take a look at this:

By CW Bill Rouse · #40578 ·

Re: [Amel Yacht Owners] Freshwater Pump - pressure sensing mechanical switch

Colin, In the following, I assume that you have an unmodified Amel OEM 66b (standard) or 88b (optional) fresh water pump. Square D is worldwide and commonly used on water-well pumps throughout the

By CW Bill Rouse · #40577 ·

Re: [Amel Yacht Owners] Volvo temperature sensor

Bill, just noticed that they have it for the TMD22 as well ,same price. I believe they ship from UK , but I still received my parts within a week. Pat SM#123

By Patrick McAneny · #40576 ·

Messages