|
Re: [Amel Yacht Owners] ZF transmission
By
eric <kimberlite@...>
·
#41920
·
|
|
Re: ZF transmission
Bill Thank you, you remember right. W have had the boat for 3,5 years and 1500 h on the engine, probably time to change the transmission oil.
Paul SY Kerpa SM#259
Bill Thank you, you remember right. W have had the boat for 3,5 years and 1500 h on the engine, probably time to change the transmission oil.
Paul SY Kerpa SM#259
|
By
Paul Osterberg
·
#41919
·
|
|
Re: ZF transmission
Paul,
I think I remember that you have the Volvo TMD22 engine. If so, this applies to you...
You have to be a very careful talking about the ZF transmissions. The ZF25M transmission that came on the
Paul,
I think I remember that you have the Volvo TMD22 engine. If so, this applies to you...
You have to be a very careful talking about the ZF transmissions. The ZF25M transmission that came on the
|
By
greatketch@...
·
#41918
·
|
|
Re: ZF transmission
Oh, and you do not need a pump.
There is a convenient drain plug near the lower stbd fwd corner of the box.
(Easily accessible on the 54)
The most difficult part of the job is not making a
Oh, and you do not need a pump.
There is a convenient drain plug near the lower stbd fwd corner of the box.
(Easily accessible on the 54)
The most difficult part of the job is not making a
|
By
Dean Gillies
·
#41917
·
|
|
Re: ZF transmission
Paul,
I’ve just fitted a new one, and the numbers I’ve been given are:
25hours after installation, then every 300hours or 12 monthly after that.
ATF (Automatic Transmission Fluid), is not 80W.
It
Paul,
I’ve just fitted a new one, and the numbers I’ve been given are:
25hours after installation, then every 300hours or 12 monthly after that.
ATF (Automatic Transmission Fluid), is not 80W.
It
|
By
Dean Gillies
·
#41916
·
|
|
Re: [Amel Yacht Owners] Re: Expected RPM at WOT
Hi Ruedi,
You’re right about the no load numbers, and interestingly your ‘load’ pressures are around 5-10kPa lower than mine across the board.
Importantly though, we are both significantly below
Hi Ruedi,
You’re right about the no load numbers, and interestingly your ‘load’ pressures are around 5-10kPa lower than mine across the board.
Importantly though, we are both significantly below
|
By
Dean Gillies
·
#41915
·
|
|
Seat photos in boat.
This is "deluxe seat MA 704-31"
Danny
SM 299 Ocean Pearl
---------- Forwarded message ---------
From: Danny Simms <sailorman.ds@...>
Date: Sat, 1 Sep 2018 at 13:18
Subject: Seat photos in boat.
To:
This is "deluxe seat MA 704-31"
Danny
SM 299 Ocean Pearl
---------- Forwarded message ---------
From: Danny Simms <sailorman.ds@...>
Date: Sat, 1 Sep 2018 at 13:18
Subject: Seat photos in boat.
To:
|
By
Danny Simms
·
#41914
·
|
|
Re: [Amel Yacht Owners] Re: Expected RPM at WOT
Hi Gang
Very interesting and great thinking scenarios Dean made. Definitively worth to check!
Just for curiosity and for completion if someone is interested. I made same RPM test with and without load
Hi Gang
Very interesting and great thinking scenarios Dean made. Definitively worth to check!
Just for curiosity and for completion if someone is interested. I made same RPM test with and without load
|
By
WASABI - Rudolf Waldispuehl
·
#41912
·
|
|
Re: [Amel Yacht Owners] Expected RPM at WOT
Porter,
Honestly carrying an extra ton will not make much difference. There is nothing wrong with the boat itself.
It has to be the electronically controlled command to the common rail. Or some
Porter,
Honestly carrying an extra ton will not make much difference. There is nothing wrong with the boat itself.
It has to be the electronically controlled command to the common rail. Or some
|
By
Nick Newington
·
#41911
·
|
|
Re: [Amel Yacht Owners] Toe pulley (headsail)
By
eric <kimberlite@...>
·
#41909
·
|
|
Re: [Amel Yacht Owners] Re: Expected RPM at WOT
Dean, you and Bill have both come to very similar conclusions and I think they are by far the best fit to explain the circumstances.
Some “soundthinking” indeed. And very appreciated.
The other
Dean, you and Bill have both come to very similar conclusions and I think they are by far the best fit to explain the circumstances.
Some “soundthinking” indeed. And very appreciated.
The other
|
By
Porter McRoberts
·
#41908
·
|
|
Re: [Amel Yacht Owners] Re: Expected RPM at WOT
Nick. Thanks again. I agree!!
This is long block #3 for this 1800hr D3
Bill Rouse and I think the devil is in the other parts. The “short block” timing system or electronics.
Yesterday I
Nick. Thanks again. I agree!!
This is long block #3 for this 1800hr D3
Bill Rouse and I think the devil is in the other parts. The “short block” timing system or electronics.
Yesterday I
|
By
Porter McRoberts
·
#41907
·
|
|
Re: [Amel Yacht Owners] Washing machine removal
I’d get 3 bottles.
One for the machine.
Two for you!
Excuse the errors.
Sent from my IPhone
Www.fouribis.com
I’d get 3 bottles.
One for the machine.
Two for you!
Excuse the errors.
Sent from my IPhone
Www.fouribis.com
|
By
Porter McRoberts
·
#41906
·
|
|
Re: [Amel Yacht Owners] Washing machine removal
Excellent, thank you very much, just what I was hoping for ... better go find some champagne first, or would that be tempting fate??!!
Excellent, thank you very much, just what I was hoping for ... better go find some champagne first, or would that be tempting fate??!!
|
By
ya_fohi
·
#41905
·
|
|
Re: [Amel Yacht Owners] Toe pulley (headsail)
€214 for the "Poulie entraineuse universelle/ALU" That's the two pieces needed for one side of the boat.
Bill Kinney
SM160, Harmonie
Annapolis, MD, USA
---In amelyachtowners@..., <divanz620@...>
€214 for the "Poulie entraineuse universelle/ALU" That's the two pieces needed for one side of the boat.
Bill Kinney
SM160, Harmonie
Annapolis, MD, USA
---In amelyachtowners@..., <divanz620@...>
|
By
greatketch@...
·
#41910
·
|
|
ZF transmission
How often should one change the oil in the ZF Transmission? assume just pump out the old oil and fill new , how much oil is it in the transmission? ATF is that the same as 90w Gear oil?
Paul on SY
How often should one change the oil in the ZF Transmission? assume just pump out the old oil and fill new , how much oil is it in the transmission? ATF is that the same as 90w Gear oil?
Paul on SY
|
By
Paul Osterberg
·
#41913
·
|
|
Re: [Amel Yacht Owners] Measuring Volvo TMD-22 oil level
Thank you. That's what I thought, but I wanted to be sure!
Thank you. That's what I thought, but I wanted to be sure!
|
By
Ryan Meador
·
#41904
·
|
|
Re: [Amel Yacht Owners] Re: Expected RPM at WOT
Thank you Dean.
This will help. I’ll run it out of gear and see what comparisons I get. I think the devil is in the load algorithm though. And to respect the little bugger we might have to
Thank you Dean.
This will help. I’ll run it out of gear and see what comparisons I get. I think the devil is in the load algorithm though. And to respect the little bugger we might have to
|
By
Porter McRoberts
·
#41903
·
|
|
Re: [Amel Yacht Owners] Re: Expected RPM at WOT
Porter,
Further to my last ...
Here’s a scenario...
Let’s assume your boost sensor is reading higher than it should (faulty sensor) or the pressure IS higher than it should be (faulty
Porter,
Further to my last ...
Here’s a scenario...
Let’s assume your boost sensor is reading higher than it should (faulty sensor) or the pressure IS higher than it should be (faulty
|
By
Dean Gillies
·
#41902
·
|
|
Re: [Amel Yacht Owners] Re: Expected RPM at WOT
Thanks Courtney
Maybe that’s the way to go!!
We’re getting a top lesson in patience, and despite this situation enjoying the hell out of ourselves. Whales galore, beautiful islands, dolphins on
Thanks Courtney
Maybe that’s the way to go!!
We’re getting a top lesson in patience, and despite this situation enjoying the hell out of ourselves. Whales galore, beautiful islands, dolphins on
|
By
Porter McRoberts
·
#41901
·
|