Hi all, I spent today calling several different insurance companies to get quotes on covering an Amel SM. Here was the outcome: USAA: Does not have Amel listed as a manufacturer in their database

Eric, We are sending back the cable today for a 40 ft. cable,I think that will be long enough ??? It sounds like you also did not run it through the conduit. The small end of the cable is only 3/4 " ,

Thanks Bill, Pricey parts. Does anyone know how that mechanism comes apart ? I loosened off the rope that goes around the pulley and tried in vain to remove the 3 bolts that go through the flange and

Pat! I think you can splice the cable, just buy a "splice" adapter should be readily available in most marine shops. Se you in Hampton Paul SY Kerpa

Paul, I think I know what you are referring to, I will take another look at that. I only bought 30 ft of cable, if I go that route I would need more, probably 40 ft. I was thinking about coming down

Pat On our most cables going in the " roof" of the Shelf/cupboard that goes aft on starboard side, it is plenty of space to go aft there I pulled my cables and antennas there inclusive SSB antenna,

Hi Bill, Thanks for this information. Will check that when hauling out my little bby 😉

Hello Bill, Thanks for this info.

Hi Ken, Thanks so much for your list. Appreciate is very 😊

Kent, I can't remember if you have as much crap running back there as I do, I think it still may be hard ,if not impossible ,but cutting the end off would make it easier . I wasn't sure if I could do

Pat On our most cables going in the " roof" of the Shelf/cupboard that goes aft on starboard side, it is plenty of space to go aft there I pulled my cables and antennas there inclusive SSB antenna,

An electrician (Marine Electrical) ran mine Pat. They cut the connector off and reinstalled it after running the cable. Kent Kent Robertson S/V Kristy karkauai@... USA cell: 828-234-6819

I am trying to install an Iridium antenna on the aft starboard rail .The conduit is unfortunately undersized to house all the wires running fore and aft. The antenna wire has a 3/4" connector already

Thanks.

Thanks Pat!

Thank you Chris, I will remember to brush my teeth afterwards. I think it is the transducer it has a smal guiding pig, that I have not noticed before when that in it's slot the transducer is about 5

Paul, Amel is the source. The primary contact for ordering parts from Amel is SAV@.... In an emergency you can phone SAV at +33 (0) 546 55 00 75. But, the 54, 55 and 64 has overheat protectors for

More confusing data on the pumps: I am replacing the pumps on my A54 #69, which uses freshwater to cool the fridges and asked Penguin (UK) to supply the Frigoboat A092819C. This is a 12v pump that

Hello Fellow Amel Owners, Anni Bea True is available for sale in the Annapolis area. I'll be onboard for showing to interested parties the weekend of September 7-10 and again during the Annapolis