Thanks to all those who commented on this. I will be going ahead and will let you know how it works out. Mark Pitt Sabbatical III, SM #419, Lanzarote, Canary Islands

Hi Bill, That’s probably a good idea, do you have pics of the installations and the parts/sources you used? I know there’s been discussion in the past about adding a fuse/breaker/interrupt switch

Hi everyone, I will have at least 50 of the drawer/cabinet handles from the 3D printer by rendezvous time. The rest will be ready in another week or so. Those who ordered, please send me your mailing

Hajo, I am in Leros marina right now having my Vetus coupling changed. As others have written up, its been a very difficult job to remove the coupling from the C-drive shaft. Normally I

.. I was three years in Leros Marina..noone is specializad on AMEL boats and I was non satisfied of their professionslity High costs!!! Max AM Patchouli II n 84

We added breakers to interrupt the power to the motors for the windlass, and jib furler and, more recently, an emergency stop system for the sheet winches for this reason. The previous owners of

Hello Hajo, While there are some good mechanics at Leros Marina and, arguably, some better ones at Agmar Marine Lakki Partheni Boatyard (next to the airport) who will all tell you they are experienced

Hajo, Hello to you and Julia! I do not have anyone to recommend unless Malta is in your plans. I know that you understand you will be required haul out of the water for C-Drive service. Ans, I know

Hello Amelians, we reserved a winter berth in Leros Marina and next year we have to do some work at the underwater ship ( Antifouling, Prop shaft seals replacement, Bowthruster, possible Volvo TMD 22

Thanks Mike! Kent S/V Kristy

Thanks Brent, thats perfect. I'll chip in for gas money as well. See you on the 1st Alan Grayson Soon to be owner

Aletes will be arriving on Monday and I'd be happy to ferry folks with our dink. I'm sure others are willing as well. We'll have to set up an Amel Uber service. Mike Aletes SM #240 Rock Hall, MD Sent

I'm going to be at the Amel rally, assuming we get there in time! Would you be able to do it that week? I gathered you're based nearby. Duane

Thanks a Jeff...appreciate the info. Steve Davis S/V Aloha

Hi Brent. Looks like Kristy will still be on the hard in Cambridge. The dink is on Kristy. We can either hitch a ride with somebody else, or I can bring the dink and outboard to StM in the

I will in the future and should have in the past carried a knife to cut away the halyard if a runaway situation presents itself. I was just up the mast using windless recently. I know you go up