Hi Graham My Santorin 1991 probably has the same units But it’s not clear what the motors are .... probably a small truck starter motor but they were quite easy to overhaul and replace the brushes

Thanks for his Bill. I really need something like this I reworded my last boat and labelled everything loudly. It was a real help even though I knew the systems well I think having a supply of cable

Ian, You were correct! I rewired the fan and problem solved. Not a bad idea to have a spare controller but its no longer urgent. Thank you and thanks to Bill, Michel for the suggestions and

Thank you Bill That was very helpful Best Regards Heinz Von: amelyachtowners@... Gesendet: Montag, 1. Oktober 2018 15:44 An: amelyachtowners@... Betreff: Re: [Amel Yacht Owners] Dessalator

Hi all, Does anyone have specifications, wiring diagrams or mechanical drawings for the in-mast furling motor that was installed in the Maramu c. 1988.  Mine has failed and, despite efforts with

Made by Filmtec SW 30 2540 (2.5"X 40") Best, CW Bill Rouse Admiral, Texas Navy Commander Emeritus Amel School www.amelschool.com 720 Winnie St Galveston Island, TX 77550 +1(832) 380-4970

Does anyone know how many 55 and 64 were built? Fair winds, Thomas GARULFO A54-122 Curaçao

Hello all I would like to Change my Membranes for my Dessalator Duo 160. Can anybody tell me the Size off the Membranes or the Oder Nr. I Think the Producer is DOW Film Tech. Thank You for

I was told the last 64 has been sold. Best, CW Bill Rouse Admiral, Texas Navy Commander Emeritus Amel School www.amelschool.com 720 Winnie St Galveston Island, TX 77550 +1(832) 380-4970

The 64 is still on the site.... I've emailed Amel to ask what the story is..and why .... Let's see what they say.... Alan Elyse Sm437 Baie de Carenage

Bill, yes I believe Amel has discontinued both the 55 and 64, looks like Renaissance 3 will be my first and last Amel ketch. I think they are intent on building modern sloops from now on.😢. Bob

Thank you Dean. Respectfully; Mohammad and Aty B&B Kokomo AMEL 54#099

I was just looking at http://Amel.fr and was very surprised to see that only two models are listed, the 50 and the 64. Has the 55 been officially dropped from production? That would certainly

Mohammad, We also give a vote to Cleopatra Marina near Preveza for winter storage. We have wintered our boats there for 3 seasons and are very happy with the service and facilities. They are quite

Thanks every one for the replies. Respectfully; Mohammad

Bill, Great! Sorry for the delayed response, we have been on the move headed South down the Tunisian coast. If you have any problems getting the new varnish to blend in or whatever we are glad

Thanks for the link to your forepeak wiring changes. That's now on my ever-increasing list of things to do. I will also put a breaker or fuse in the power line to the bow thruster. I'm interested

Hi Ian, Thanks for the info. Fair Winds Eric Kimberlite Amel Super Maramu #376

Jose, I had a similar problem some years back. The compressor ran but the fan didn't. The advice I got was that it was a problem within the controller (assuming you have applied 24V to

Mark, when I repowered, i had it set up so that the battery negative is only connected to the engine block when the key is turned to “glow”, “start”, and when I push the “Stop” button. If