Hey Ian. Thanks very much for that. Will order one asap. Best regards. Alin, SM2k 283 , Wanderer

Thanks for your answer. I measured the resistance through the switch and there is a permanent contact. So the switch is on all the times.

Yes Duane, with the Webasto units it works without a problem. Kind regards, Willem Kroes SM # 351 KAVANGA Op 19 okt. 2018 7:52 p.m. schreef "sailor63109@... [amelyachtowners]" : For those who have

For those who have replaced a Climma unit with a Webasto or Dometic unit: did the Relay Box for the Sea Water Pump in the Engine Room work with the new air conditioning unit? I'm assuming that all

Duane, What you're referring to as a "gennaker" probably isn't a gennaker. It's a downwind sail (balooner) that you will enjoy sailing deep angles (150-180) with. The windspeed restriction is very

Hi Fellow Amel owners those looking to purchase. I have lowered the price on our well maintained and upgraded SM, which is for sale in the Annapolis area. The boat is a 1996 with lots of new

It can be bad temperature switch or it could be low water flow and switch shuts it off because overhitting. Vladimir SM 345 "LIFE IS GOOD"

Hi Alin, The Onan part number is 0309-0295-01 Switch - Temperature. I got a spare from my local Onan dealer. Your problem is not unheard of. Good luck. Ian shepherd SM2K 414

Thanks Danny, I could not get it down this morning to look but will do so at the first opportunity. Regards Ian Crusader

Hello Peter, I am really sorry to hear your bad luck story. I am a great believer in doing as much as I can on the boat myself. Most things are easy to get at and not so technically

Hello everyone. I have a problem with my Onan on a SM 2k, the generator starts and dies. After some reading , I discovered the problem, the sensor that is placed on the exhaust elbow. I took the

Hi. I attach a photo of the swivel with the tongue beside it. Second try. Regards Danny SM 299 Ocean Pearl

Here is a comparaison between the 2 transmissions I did: http://www.nikimat.com/furler_transmission_leroy_somer_vs_bonfiglioli.html Sincerely,

Hi again, Interesting Mike O, Craig (Sangaris) said that many lip seals have a supportive steel ring embedded in the crown. I guess the rubber has disintegrated and exposed the rusting steel, but the

Dear Ian, No help really but you are not the only one. I had Volvo agent Papeete Tahiti service my Volvo and mend a minor leak in the water pump. They apparently re- installed the ancillary drive belt

Oops! Hit the send button by mistake. Steve, Spice IslandMarine in Grenada cannot meet the Pantaenius new requirements. The are nocradles or pits. Boats are blocked with jack stands and

Steve, Spice IslandMarine in Grenada cannot meet the Pantaenius new requirements. The are nocradles or pits. Boats are blocked with jack stands and tethered to ground screws. With

I am fishing for a gut feeling on this one . Whilst in Marmaris Turkey I had a company called Marlin Yachting come and have a look at my Yanmar engine which was becoming increasingly

I think the steel is just a structural backbone for the seal and other materials are configurations would give you longer life. I replaced ours with off-the-shelf SKF seals. Also the bow thruster

Hi. Attached is a photo Danny SM 299 Ocean pearl