I would like to install a bowsprit for my Super Maramu in order to improve the performance of my gennaker and my spinnaker. Some of you might have already installed this type of device, could you

Mike, Glad to hear my information was helpful. Adriene and his daughter Ashley are awesome. We are currently in Wilmington, NC. We also plan to stop in St Augustine but not sure when. Hopefully we

Thanks

https://svtourai.com/ has a photo. Denise

Cool, thanks i wonder if it would be possible to get pictures of his without cushions to see if a good marine carpenter could duplicate it and make the wood match. That must be the most custom

Well, much to my surprise an overnight soak in "cleaning vinegar" (apparently a higher concentration) unplugged the hose. When I cut the wire ties holding the 4 foot of 1" hose extension and aimed it

Duane, The tube probably should have a bonding wire on it but I don't think that mine do. The ball valve at the bottom of the hose does have one. Forget the vinegar. It won't do anything. Use Sew

SM #380 TouRai has a traditional looking settee that was done by Amel not the owner. As I recall, that SM was built for a really tall Dutchman and has a bunch of unique semi-custom features including

Wolfgang, I don't think Amel ever did that, but, I would never say never. Best, CW Bill Rouse,, Admiral, Texas Navy Commander Emeritus Amel School www.amelschool.com 720 Winnie St Galveston Island,

Wolfgang, The Marina in Deltaville is in a pretty good location, with some good folks there. We are closer by car than boat, we are at the Severn River Yachting Center, just off the Severn River and

Hey Bill, Just saw a sm that had the salon love seat, cabinets and pull out birth replaced with a traditional settee. Am i correct that this was never an option and was a mod done by the owner? I

Yes I do, although I am not currently an active member, having been boatless for the past few years to my great regret. Jean Boucharlat Formerly SM 232

Hi Alan I cannot answer your question, so wait for those who are more qualified to provide the answer. However, in the interim let me say that we also swapped out our old single fuel filter system for

Hi everyone. I am interested in fitting a day fuel tank in a super maramu and wondering if anyone has ever done this before. I would like to set up a fuel polishing system going to the day tank

Hello all, Just curious if there are any members from or living in Japan? Trevor SV Iris, SN27 Currently in North Borneo

Hi All, i am changing from the single racor filter to dual racor 500 series filters. When i removed the single filter it was mounted on a block of wood that had 2 bolts thru it which seem to be

I noticed that the hose that fills the tank has quite a bit of corrosion at the tank connection. Shouldn't this copper tube have a bonding wire? I posted a photo of it. I noticed it while trying to

Thanks for the heads up Paul. Our slider also showed signs of cracking. See attached photo. As it happened we stopped in at Hampton over night to allow weather to moderate off Hatteras and the shop

Hi Gary, I have no problem with my mizzen furler. Works perfectly. Just considering prevention rather than cure. Are you saying a water flush would go through and rinse salt out internally? The person

DANNY: Do NOT add a grease nipple to the mizzen furling gearbox. The box is designed to run with minimal grease and adding more will accrete salt & dirt accumulations. I undertook a laborious