This it the price I received from Iwaki. Fair Winds Eric Kimberlite Amel Super Maramu #376 Here is your quote request MD-70RLZT-220: List cost = $560.00 ea.

Thank you. I got in touch with NZ Dessalator rep, will wait for them to send it and will mention what you said. Do you have any idea how much was yours?

Hi, I had 2-35 Gallon aluminum tanks fitted into the port “liferaft “ locker. They are each independent of the main fuel tank. Each one has a fuel fill, a vent, and a pickup tube connected to

The Dessalator representative in Maine has both the Calpeda pump and an Iwaki Pump which is much less money that the Calpeda pump. The Iwaki pump works fine for my Watermaker which is the same as

hey craig I was going to call you on this. Do you have a hard bimini now?

Thanks Duane...Happy Thanksgiving. Steve

Yes! Happy Thanksgiving from Aruba where we just had the mostawesome traditional Thanksgiving meal (lots of American tourists here who theisland cater to very well) With bestregards, Mark

Thanks so much Bill

Steve, There are two in the Photo section. Search for "Ballooner" or use this

Alin, You have the Dessalator D150/160 water maker. The low pressure feed pump spec is 900 liters/hour. You can buy the exact 230VAC 50htz replacement at www.dessalator.com. Best, CW Bill

Hi Alexandre. Thanks for your answer. My one is a bit different. Pls see the pictures, I didn't include the primary pump as it is removed. Maybe I will send a picture latter. Thanks. Alin

Does anyone have a good picture of how the looped end of the ballooner halyard is spliced by Amel. The one on our boat is not original, and probably not correct. Thanks for the help. Steve

I'd like to wish all my American Amelian friends and acquaintances a very Happy Thanksgiving where ever you may find yourselves today. Hopefully it's warmer where ever you are than here where our

Do you have the “DUO D60” (which can be used with 24 Volt or 220 Volt? You can find some information here: http://www.nikimat.com/water_maker_duo_d60.html Sincerely,

Hi Amel owners. My water maker primary pump, the one that sucks from the strainer and sends water to the high pressure pump, has the shaft badly corroded and needs replacement. I find it very

Thank you Bill! Arthur

Arthur, I do not know the brand, but on my SM (#160) the shaft on the steering system is 25mm, the gear has 40 teeth. The gear on the chain drive motor has 19 teeth. I am not sure that all SM

Does anyone in the US have a mold for the settee refrigeration box? Does anyone know if Amel Martinique has put in the refrigeration boxes? Regards Alan Grayson SV Ora Pai SM 406 Ft Lauderdale

I am going to install a parallell autopilot, the rotary drive from RM. I need to know the brand of steering wheel/Axis , on SM to find the right tooth sprocket for that axis. RM has the tooth

Thank you Bill Heinz Am 21.11.2018 11:06 schrieb "Bill Rouse brouse@... [amelyachtowners]" <amelyachtowners@...>: