Hi Gang, I viewed Papa II before buying Eleuthera. I would not touch it with someone else’s pole. Run … RUN!! Jean-Pierre Germain SY Eleuthera, SM 007, Opua NZ

Hello It happened to me last year. I took a thin rope and tied several small steel nuts to it. Lowered from above. One has to watch the rope at the bottom. This went well after several attempts.

Hi Jay, My husband and I went to see Yashar in MD a few years ago when we were in the area for the Annapolis Sailboat Show. My husband described it as a Frankenboat. We understand that after the keel

Hi All, i have a small problem. I was using the ballooner halyard to hold my new anchor as i was installing it. Unfortunatly my knot on the other end came undone and the halyard ended up on the deck

Thanks Brent, that is a truly impressive list. I can only view it online in google docs. I would suggest we use your list and add extra tabs for the different models. I'm not familiar with Google

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the amelyachtowners group. File : /Instruction_manual_toe_pulleys_SMA.pdf

Bernard Ancelle in France makes a direct replacement for the Super Maramu genoa toe pulley in PETP which is very chemically resistant (particularly to sea water), does not absorb water, resists UV and

Hi Alan. I really hope that I didn’t upset you. It wasn’t my intention to take over this list or supplant the work you have done, as I already know how much considerable effort it took to do that.

I remember someone posting about having the foot fabricated. I have some questions for you. Best, CW Bill Rouse Admiral, Texas Navy Commander Emeritus Amel School http://www.amelschool.com 720

Hello Alan, I hauled out after merely 2 weeks in the berth… the veggies were far too prolific! Regards, Jean-Pierre Germain Eleuthera, SM 007, Opua… on the hard.

Sure Leo Please find photos as attachments. They are expensive for sure but will last longer than the originals. Direct bonding on stainless steel not advisable but gasket and anti corrosive grease

Hi Rink, Can you upload a foto? Leo SM Yinyang #69 Shelterbay Von meinem iPad gesendet Am 16.12.2018 um 04:20 schrieb Rink de Haan rinkdehaan@... [amelyachtowners] <amelyachtowners@...>:

Dear all, Aluminium on stainless .... is NONSENSES ! The price of 213 euros in non reasonable ! JL Mertz on CottonBay Le 16/12/2018 10:20, Rink de Haan rinkdehaan@...

Dear all, The toe pulley is available from Amel again. They now make them of aluminium and they cost €213 a piece (actually in two parts). I received 2 of them a couple of weeks ago. Best

Thanks JP I haven't used any services in Opua yet All I can suggest is : https://www.bayofislandsmarina.co.nz/marina-trade-directory/ which you probably received when you arrived. I won't be back on

Well done Alan, We too are in Opua. Would you know a good sander/painter to repair some errors on the Coppercoat. Now on the hard. Cheers, Jean-Pierre Germain Eleuthera, SM 007, Opua NZ

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the amelyachtowners group. File : /Yahoo Group Amel Register.xlsx Uploaded

Just a caution. I had to paint in the US after using Islands 44 in the Caribbean. On Seahawk's advice, I applied SeaHawk Biocop with a primer coat over Islands 44 (which was fantastic). It was a

Excellent advice from Bill there will always be repair’s but a well used boat is generally in better condition than a long ‘rested ‘ one Cheers 🍻