Wonderful illustration by Gary Silver !!! --------------------------------------------

Hopefully I will never need what you have just provided – but that is a wonderful Christmas present! Thank you very much, Porter McRoberts 54-152 Ibis Excuse the errors. Sent from my IPhone

Gary, Thanks! Greatinformation. With bestregards, Mark Skipper Sailing Vessel- Cream Puff - SM2K - #275 Currentlycruising - Santa Marta, Colombia www.creampuff.us

Paul, In addition toEno, I would also suggest looking at Dickerson Marine stoves (made in Canada).We admired one on a friends boat as they seem very well made. I’m not sure ofthe sizes but

Does anyone have a drawing or diagram of the fresh water distribution pipework for the 1988 Maramu 46? I have a leak.  Whenever I switch on the water pump, fresh water accumulates in the space below

Hello and Merry Christmas to everyone: Some time ago I promised to write up and share my experience overhauling the mizzen furling gearbox/cranking mechanism on the Super Maramu 2000. I found the

We would like to upgrade our original 2-burner ENO stove. Our options include a newer nicer ENO but all ENOs appear to have the same dimensions, which allows 5.5 cm of unused space on either side of

Had my AB for over 10 years. Minor svc only. Bali Hai SN 24 Annapolis Ric Gottschalk Kitchen Magic Refacers, Inc No employee or agent is authorized to conclude any binding agreement on behalf of

Roque Thank you so much that is exactly what I needed! Cheers! Courtney

Courtney I am not aboard but a friend there measured it: From the back of the mizzen mast to the mizzen sail sheet 3 meters (only the cabin top: 2,40m) Clearance from the after cabin top to the mizzen

Thanks Mark I'll Try that!! By the way would any 54 owner mind measuring the distance from the back of the mizzen mast to the aft traveler specificly to the most forward part of the sheet?

Brent My name is Courtney Gorman My Boat Trippin Amel 54 AMEL54101D808 Home port Sea Island GA USA let me know if you want any other info Cheers Merry Christmas Courtney

thanks I appreciate the info!!

Hello Alexandre, Good luck with your insurance … as mentioned before, insurance companies are interested in your money; their obligations are seldom respected and they will fleece the unwary every

Courtney, Check with theHighfield dealers in the USA. The guy we purchased from will ship most placesin the world. So will the dealer in Canada. Being in St Thomas there would beno duty from

We bought an AB Dingy but are not happy with it. It started to part between the Hull and the tubes after 6 month. First after many angry mail they agree to repair. The repair man told us that this is

I am now looking at my 4thand final dinghy since December 2017: most likely an OCTENDER; made in NEW ZEALAND. 1st dinghy was on board when I got AMELIT; a brand new 3.9M HIGHFIELD center console &

I had the 310 and it fit great but lost at sea last month Now I am in St Thomas and there are no Highfield dealers Achilles are available but I have no information on how good they are. A friend

I believe it was Bill ROUSE, when he was on board, suggesting me 3.20 meterdiagonally. Best Regards Teun AMELIT A54 #128 Dec 22, 2018 12:07:39

I’m not sure how much bigger the aft cabin top is on the 54 but,we have the hypalon version of this dinghy and it easily stows on our 53(diagonally). Off shore we lash it to the aft cabin top. On