For reference, this is the way it looks on build number 121. It appears Amel made quite an upgrade for the later models Regards, Arno SV Luna, A54-121

Thanks to Ian and Judy Jenkins Pen Azen, I installed a Sea Me target enhancer when Kimberlite was built. I think it is finally in need of replacement or repair. I cannot find the company. Does

Hi Bill, I will be in the St Maarten area till about April then on to Colombia. Fair Winds Eric Kimberlite Amel Super Maramu #376

I would like to know what you think about having an Amel Caribbean Rally in 2019. I would be happy to spearhead it and believe I might be able to get some discounts from marinas, marine vendors, and

I uploaded some of them to Album: Genoa Furler Stem Fitting Upgrade located at https://groups.yahoo.com/neo/groups/amelyachtowners/photos/albums/560797879 Best, CW Bill Rouse Admiral, Texas

Ah, Bill, you were on the uptown side of the tracks - gotta get behind Lesters. Cheers, Craig ---In amelyachtowners@..., <greatketch@...> wrote : Don, If the motor has not failed due to water

Hi Alan, When I took delivery of Kimberlite I changed the stove over to propane with aluminum tanks. To get the correct heat I carefully used a very small drill it in a pin vise to drill out every

Don, If the motor has not failed due to water intrusion and corrosion, it can almost certainly be repaired. We have had excellent results from Broward Armature in Fort Lauderdale. I think a figure of

Hi Don, Just about any substantial auto generator / motor repair shop should easily rebuild yours. Do you know what is wrong with it? If Ft Lauderdale is a possibility for you I've had Lauderdale

One of the electric furling motors on my Amel Mango has failed. Amel has advised that they have replacement motors available. Does anyone know of a possible replacement source that is compatible

I will do that later when I return from my labors aboard f/v Alisha J Sent from my Sprint Samsung Galaxy S7.

Hi Oscar, The ENO can use propane or butane. The oven gas burner has an air ring adjustment for the different gas. If it has been set up for butane, the oven will work better with a smaller air

Congratulations on your Amel 54. We are more or less in the same stage of the process. I’ve ordered a Aluminium Arch that will be powder coated in the same color as the hull. It’s supplied via

Jeff, Email them to me and I will get them uploaded one way or another. I am traveling today, so will not be able to do it until this evening. Best, CW Bill Rouse Admiral, Texas Navy Commander

Oscar. We’re in Panama. We use either. No issues. I converted on of the 2 gaz lines to AMERICAN (Panamanian fitting). Left one french. The French bottle rust. So keep them well painted. Gaz here

Jeff, This posting is extremely complete. It is as if a combination of a structural engineer, an experienced fisherman and Amel owner wrote the report. Obviously, since Amel changed the stem

Oscar, On our 11 year world trip to 58 countries we had American style gas bottles. We found liquified gas when we needed it, wherever we were. New Zealand required us the have the Aluminum tanks

I can't seem to upload more photos, I'm getting a message saying I exceeded my 10mb limit. Sorry.

Good morning Amelians. This could be encountered by early 54 owners. My vessel is #14 Before I made a return trip home from a stay aboard Spirit, I needed some close up photos of the connection of my