Eric, No I didn't. I'm not on Facebook anymore...I ditched it about 18 months ago. Cheers Alan Elyse SM437

Alan, Did you see the photo on Facebook? Fair Winds Eric Kimberlite Amel Super Maramu #376

Have you seen the Lugun table bracket. We have one on our Mango. They are brilliant, and can be easily removed or just swivelled out of the way.

Hello Andre Forgive me for the loss of your first email. I attached the link with some schemes and especially photos of the folding table of the

Alan, I believe Eric is referring to using bolts and nuts to push it off. Best, Bill Rouse 720 Winnie St. Galveston, Texas 77550 832-380-4970 My Calendar Yacht School

Hi Eric, What is the "trick" to removing the coupling from the C drive ? Cheers Alan

Didier just replaced the coupling on my Amel 54. One of the bolt heads on the shaft brake sheared off leaving just the bolt behind. Luckily it did not come out completely, as that would have destroyed

There should be a stud/nut and possibly a bushing under that mastic on the bottom of the C-DRIVE. This stabilizes the C-DRIVE from any twisting due to thrust. Inspect it by removing the mastic.

Hi Ryan, I like Locktite 542 or if you can’t find it try the regular red Locktite. However it is difficult to remove the red Locktite. The threads must be absolutely clean , I would clean the

Hello again, When we were in Le Marin, we had a bunch of work done on our genoa furler -- Amel rebuilt the gearbox, Caraibe Greement replaced the forestay, etc. One of the things Amel did (unasked)

Hi all, In the last few days I've noticed a strange, intermittent vibration that seems to be coming from my propeller. We had the engine mounts and Vetus coupling rubber balls replaced in Le Marin a

Donato, I believe that Amel SAV response has been changing over time, probably because they are not 100% sure. And, I am not sure because possible the assembly has changed over time. SAV told me that

Bill, following your advise I’ve asked Amel whether the new design is suitable on the SM2000 #468. And the answer was negative. I’ve then called the producer, who confirmed that the adjustments

Thanks Bill. Fair Winds Eric Kimberlite Amel Super Maramu #376

Hi Andrew, That sounds perfect. I will look at flights, let you know when we will be there we will visit at your convenience. Many thanks Mark

Eric, The price Amel quoted is 416.24€ plus freight. It is my understanding that Amel is shipping this new caliper now, but I do not know how much inventory they have. I agree, I like the design. I

Hi Mark Yes I think that might be possible – we live near Toulouse but are planning the annual lift out for 4 days on the 29th of April to 2nd of May and then will be there or nearby until

Hi Andrew, I am looking at the possibility of a few days cycling in Girona at the beginning of May. Perpignan is only an hour or so away. Are you in the area around that time? Kind regards Mark

Hi , Do you have any idea as to who makes these fittings? Fair Winds Eric Kimberlite Amel Super Maramu #376

Bill, It looks very nice. What was the cost from Amel? I have some parts waiting to get put together at Amel for shipment. When do you think this assembly will be shipped. Is it for the Kimberlite