QSails, rocks! 35 Amel owners buying from QSails is powerful. I am proud to say that BeBe SM 387 was the first of 35. If you go to the WiKi Help page at AmelYachtOwnersGroup.com and click on WiKi in

Thank you, Danny! We will definitely take a close look at the swivel regarding the tongue and nylon pencil. We very much appreciate the specialty Amel knowledge here! Cheers, Mike & Hannah SV Trilogy,

We received a new Genoa, Ballooner, and mizzen ballooner from Q sails a few months ago. The sails are excellent quality and fit, and the service was great as well. Steve Davis Aloha SM72 Ko Olina,

Hello, I also want to change my sails, could you tell me what are the rates currently for the hydranet ?MerciJLMERTZon CottonBay Le 22/05/2019 à 17:21, Gary Wells a écrit :

Just got my quote from Q Sails in Izmir. While shipping to Maryland is about $400 US, the pricing seemed quite competitive for a full set of hydranet. Q Sails states that they have provided about 35

I know this isn't exactly on topic, but it has been my experience that the better technique is to still maintain the tank closed while underway, then flush it out and treat it daily. It is just my

Hello Alex, The antenna is made by Shakespeare Good luck Jean-Pierre Germain, Eleuthera SM 007

Thanks Bill. Just what I needed to know. Things are much clearer now. Derick

Alex, I believe that you can epoxy the two pieces together. I like JB Weld for this project. https://amelyachtowners.groups.io/g/main/photo/84619/3?p=Name,,ssb+antenna,20,1,0,0 Please look at this

Dear Amelians, the part at the bottom of my SSB antenna (thread on one side, screwed on the other side) broke. I can't see the manufacturer. The HF is an icon IC 802. Does anyone know where I find a

Hi Paul, I got a main and genoa by North Sails in NZ for +- Eur 1000 more... but in 3DI Nordam. Was same price as NS triradials. The new sails are tremendous. Jean-Pierre, Eleuthera, SM 007

Possibly yours is not an Amel original installation. All the SM Amel installed boats I have seen have anti-siphons for each of the electric toilet pumps which were mounted on the bulkhead. Possibly

Bill There is no anti-siphon valve at all, our pumps are placed on the "floor" just in front of the Onan diesel as fare on the port side that is possible. from there the hoses go directly forward and

Paul, I assume that you have original Jabsco "Not-So-Quiet" electric flush toilets. I agree with Mark, and if you flushed correctly the water passing back into the toilet from a leaking joker valve

Derick, There are pull strings available that were installed by Amel. These pull strings have a piece of rubber tied to them about every 6 feet. The rubber was tied so that the strings did not wrap

Two reasons. First, because it is too short. Second, the shape on ours is a little 'flat'. I find it hard to get an effective foil like shape because it doesn't 'cave' enough at the forward spot where

Thank's Ian When you say not happy with the cut, do you only mean it is to short? Or the shape is also bad and it does not perform well? Paul SY Kerpa SM#259

The strange thing is that the water s clear. so I'm suspicious could it come through the salt water flushing pump does not make sens to me but... Paul

Paul, While you areunderway and the holding tank valve is open, sea water can push upward. Thiswill cause added pressure in the tank and the air pressure in the tank will putbackward pressure on

We have both main and mizzen sails made by Incidences, new in 2013. I do not like the cut on the mainsail. It is short of the masthead by over 30 cm (even with the foot raised). Mizzen is fine. And a