|
Re: Bow thruster seals
Hi Jose,
Please add me to your list. I’d like 2 sets, too.
I’ll be in Maryland USA until November.
Thank you for doing this. If they can ship directly to me the address is
7025 Thorneton
|
Hi Jose,
Please add me to your list. I’d like 2 sets, too.
I’ll be in Maryland USA until November.
Thank you for doing this. If they can ship directly to me the address is
7025 Thorneton
|
By
karkauai
·
#46264
·
|
|
Re: Bow thruster seals
Danny,
I understand very well how the system SHOULD work and, if everything is new, the seals should work as designed. Unfortunately, wear can change the system and, in my case nothing worked to stop
|
Danny,
I understand very well how the system SHOULD work and, if everything is new, the seals should work as designed. Unfortunately, wear can change the system and, in my case nothing worked to stop
|
By
Jose Venegas
·
#46263
·
|
|
Re: gross and net tonnage
Pat,
Based on USCG Form 5397, Application for Simplified Measurement, CARA is documented 26 GRT and 23 NRT.
Denise
SM #440 CARA
Deale, MD, USA
--
Denise McGovern
mcgovern.denise@...
|
Pat,
Based on USCG Form 5397, Application for Simplified Measurement, CARA is documented 26 GRT and 23 NRT.
Denise
SM #440 CARA
Deale, MD, USA
--
Denise McGovern
mcgovern.denise@...
|
By
Denise McGovern
·
#46262
·
|
|
gross and net tonnage
I am getting ready to renew my C.G. documentation and I want to correct the stated tonnage ,which is wrong and overstated. While in the Caribbean this year we overcharged upon entry based on the
|
I am getting ready to renew my C.G. documentation and I want to correct the stated tonnage ,which is wrong and overstated. While in the Caribbean this year we overcharged upon entry based on the
|
By
Patrick McAneny
·
#46261
·
|
|
Re: Furling motor brushes
Thanks Mark and Kelly for confirming.
-James
|
Thanks Mark and Kelly for confirming.
-James
|
By
James Cromie
·
#46260
·
|
|
Re: Furling motor brushes
James,
The SPR-A007 brush fit perfectly in both my main furler motor and outhaul motor. The link on the Eurton website says "A005" in the hyperlink for some reason but the correct part number is
|
James,
The SPR-A007 brush fit perfectly in both my main furler motor and outhaul motor. The link on the Eurton website says "A005" in the hyperlink for some reason but the correct part number is
|
By
Mark McGovern
·
#46259
·
|
|
Re: Furling motor brushes
James-- the part number is SPR-A007.
The Eurton website has an incorrect URL, which is why I used a hyperlink in my initial email.
If you click on the link, you'll see that the page is for the 007
|
James-- the part number is SPR-A007.
The Eurton website has an incorrect URL, which is why I used a hyperlink in my initial email.
If you click on the link, you'll see that the page is for the 007
|
By
Kelly Ran
·
#46258
·
|
|
Re: Furling motor brushes
Mark - you used the A005 brush, and not the A007 from Eurton? I believe someone else posted using the A007 for the Leroy Somer motor, but it looks like yours fit perfectly.
Could you confirm that
|
Mark - you used the A005 brush, and not the A007 from Eurton? I believe someone else posted using the A007 for the Leroy Somer motor, but it looks like yours fit perfectly.
Could you confirm that
|
By
James Cromie
·
#46257
·
|
|
Re: Battery temp monitor and alarm
I am curious about the loudness of the alarm. I have the model that Bill posted, and mounted down by the battery switches. The alarm is not very loud and I think would not be noticed while motoring.
|
I am curious about the loudness of the alarm. I have the model that Bill posted, and mounted down by the battery switches. The alarm is not very loud and I think would not be noticed while motoring.
|
By
rossirossix4
·
#46256
·
|
|
Re: Standing rigging on 54
Good morning Barry;
We will be in Gouvia marina. Nicky is only flying to Corfu and figuring the time required to complete the work that we have laid out for him. If you think you will need some work
|
Good morning Barry;
We will be in Gouvia marina. Nicky is only flying to Corfu and figuring the time required to complete the work that we have laid out for him. If you think you will need some work
|
By
Mohammad Shirloo
·
#46255
·
|
|
Re: Standing rigging on 54
Hi Mohammed,
We will be in Corfu around this time.
Which marina are you going to be in?
Not sure if I need anything but might think of something that should be checked. I do need to replace my mast
|
Hi Mohammed,
We will be in Corfu around this time.
Which marina are you going to be in?
Not sure if I need anything but might think of something that should be checked. I do need to replace my mast
|
By
Barry Connor
·
#46254
·
|
|
Re: New Furling Motor
Thanks for sharing I had same problem
Stefano
N’EVEREST Super Maramu 185
Italy
|
Thanks for sharing I had same problem
Stefano
N’EVEREST Super Maramu 185
Italy
|
By
Stefano Biffi
·
#46253
·
|
|
New Furling Motor
The replacement Leroy Somer motor, LSMBT82, supplied by Amel to SM owners is slightly smaller in diameter than the original.
I had to space out the black ring to get it to fit.
HOWEVER, after a visit
|
The replacement Leroy Somer motor, LSMBT82, supplied by Amel to SM owners is slightly smaller in diameter than the original.
I had to space out the black ring to get it to fit.
HOWEVER, after a visit
|
By
Alan Leslie
·
#46252
·
|
|
Re: Water tank overfill, companionway ladder, galley sink drain hose
Hi Eric,
Where the companionway door slides down into the slot behind the companionway ladder, the bottom of that compartment rotted and fell out. The drain hole was clogged and water sat, never
|
Hi Eric,
Where the companionway door slides down into the slot behind the companionway ladder, the bottom of that compartment rotted and fell out. The drain hole was clogged and water sat, never
|
By
karkauai
·
#46251
·
|
|
Re: Water tank overfill, companionway ladder, galley sink drain hose
Hi Kent,
What are you referring to when you mention the companionway door support?
Fair Winds
Eric
Kimberlite Amel Super Maramu #376
|
Hi Kent,
What are you referring to when you mention the companionway door support?
Fair Winds
Eric
Kimberlite Amel Super Maramu #376
|
By
eric freedman
·
#46250
·
|
|
Re: TMD22 Emergency Shutoff
Ric! You’re selling Bali Hai?
Will hate to see you go. What are you going to be doing with all that “free” time?
Kent Robertson
S/V Kristy
karkauai@...
USA cell: 828-234-6819
|
Ric! You’re selling Bali Hai?
Will hate to see you go. What are you going to be doing with all that “free” time?
Kent Robertson
S/V Kristy
karkauai@...
USA cell: 828-234-6819
|
By
karkauai
·
#46249
·
|
|
Re: Battery temp monitor and alarm
Thanks everyone. I ordered the one Gary has..,looks perfect.
Kent
Kristy. SM243
karkauai@...
USA cell: 828-234-6819
|
Thanks everyone. I ordered the one Gary has..,looks perfect.
Kent
Kristy. SM243
karkauai@...
USA cell: 828-234-6819
|
By
karkauai
·
#46248
·
|
|
Re: TMD22 Emergency Shutoff
Go ahead and test it. It's best to do this as you enter a narrow harbor. Sea state adds to the "pucker" factor. I did this test once unintentionally.
Bali Hai is for sale
Ric
Bali Hai SN
|
Go ahead and test it. It's best to do this as you enter a narrow harbor. Sea state adds to the "pucker" factor. I did this test once unintentionally.
Bali Hai is for sale
Ric
Bali Hai SN
|
By
Ric <ric@...>
·
#46247
·
|
|
Re: Am I the only one so stupid?
Hi Oliver,
We have been told to always put the fresh water dipstick down after the tank has been filled. Should it get damaged or broken entering or leaving the boat it is a very big problem. No
|
Hi Oliver,
We have been told to always put the fresh water dipstick down after the tank has been filled. Should it get damaged or broken entering or leaving the boat it is a very big problem. No
|
By
Mark & Debbie Mueller
·
#46246
·
|
|
Re: Battery temp monitor and alarm
Hi Kent,
Check on Amazon - they've got wireless ones with multiple sensors for $15 - $25 ish.
Craig
|
Hi Kent,
Check on Amazon - they've got wireless ones with multiple sensors for $15 - $25 ish.
Craig
|
By
Craig Briggs
·
#46245
·
|
