Thank you Barry You made both hoses new as I understood.The inlet from the Pump (maybe 1-1,5m) , and the outlet tothe Controls Board in the Galey which was slightly more than 3Meters, Right? Do

Thanks to all of you. The chemical mace is usually not my favorit. So I will try to dismantle the kitchen locker with the freezer completely. If this is successful and discovers some secrets I will

Hi Ruedi, Should have checked that hose when we were together. Nicholas at Dessolator gave me the fitting needed to retighten these hoses. My hose covers peeled off last year. Nicholas actually made

Success this morning. Voltage sensing cable to regulator had a loose connection at the alternator. That connection was very difficult to get at ... So now voltage at regulator is about .3V HIGHER

Hi Ruedi I replaced my Dessalator hoses in Corfu recently. I got them made (next day service) with stainless steel fittings (not cheap at €270 for the pair but good quality) at a farm equipment

Hi Mohammad Thank you for your valuable input. I justhave seen by chance few days ago that the HP hose on the Membranes got somewater leakage. I have tightening the screw a bit and it stopped.

Alex, An additionalthought: Look at this website or app for planning your trips on the USA coast.It has local bridge names so you can hail them to open, marinas/fuel,anchorages, and hazards. The

I've learned many things from this boat. The original angular anchor chain washdown attachment is missing and probably no longer made. One could convert the line to fresh water but I'm told that the

Stiff brush avery couple of days while anchored in heavy growth sreas will keep that from happening. Regarding the rust, great incentive to wash down with fresh water when hauling anchor and to pull

Good question Danny - would hate to loose an RO Membrane to chlorine destruction. Points to consider: Chlorine dissipates naturally over time - slower in a closed tank, though. So don't flush your

Re-galvanising is a good option when there are signs of rusting and I found it economical Regards Paul

Barry, Alcohol is a common disinfectant. The biggest issue is access to the 3 compartments in the SM and 54, especially if the SM or 54 has Salon Dining Seat Refrigeration. Best, CW Bill

Hi Bill, Woud that amount of flushing be suficient to get the chorine levels down enough to prevent damage to the water maker membranes when back flushing with tank water?. I have read that a

James, I am sure that we aren’t the only two to have experienced this debacle. I am going to pass my nickname “Rusty” on to you officially until the next person admits to dealing with the same

Yes, but only with fresh orange juice and lots of ice, I wake up and my tank remains an issue Paul

I tried power washing, vinegar, and peroxide...all to no avail. On Kristy, two liters of bleach didn’t touch it. I used 4 gallons and left it overnight for ~15 hours...it killed everything. Be

Hi Bill, I was told to clean out the tank from the opening on top. After doing a clean with a sponge then I also have used Vodka, have about 100 liters of water then pour in 4 liters of Vodka, let it

+31 20 342 21 32 this gets you to reception the lady if you ask kindly should transfer you if he has time, his name is Michelle I believe, Some times he has to call you back I had issues last week

Thanks Paul. Do you have a phone number?

Thanks Bill. Great minds think alike. My next to do was to reprogram the regulator! Temporary fix only but I agree that there must be a loose connection somewhere. I will also call Mastervolt.