Just to add to the knowledgebase on a related watermaker topic, when I asked Dessalator's USA rep Mark Fruehauf at Balcen (info@...) about how best to winterize my watermaker I got this reply: "For

Gary, I for one would love to see the schematics and parts list that you used to modify your system! -- Mark McGovern SM #440 Cara Deale, MD USA

Yikes! Thx for that. Will remember not to smoke around it :) I'm going to get the free liner they are offering as a fix. They have a

In november 2017 I spoke with two Dessalator representatives on the MET's in Amsterdam. I asked them about to sterilize the membranes of my DUO 60. The answer was quite simple: It is not necessary to

As I said above, that’s exactly the problem I found and fixed: loose connection in the voltage sensing cable for the alternator. But the latest is that the alarm came back on last night after 8

Seems it's not available from Amazon anymore, and this is why : https://www.cpsc.gov/Recalls/2019/cvb-recalls-lucid-folding-mattress-sofas-due-to-violation-of-federal-mattress Pity, I thought it was a

Regarding my previous post. My problem was much like the one described below by Bill. If wire connections are loose, when they flick the Mastercolt restart itself initializing it with a higher initial

Had a related problem once. It was blamed on the Mastervolt regulator. Replaced it. Problem continued. It was later determined that wire connections had become loose after 1200 miles passage.

For those SM owners interested in an aft deck cushion, we purchased this three years ago. It is left outside all the time and is still in good condition. Lies flat, folds up. It fits almost perfectly.

We also had a Sunbrella cover made, and went one further having a teak frame made to measure as a base to keep it all off the deck hence allowing it to stay dry. This has worked perfectly and we have

We do the same as Porter however we did not recover our cushions we just leave them on the deck all the time we’re on the boat great place for people like good breezes great views Cheers Courtney

Stefan. We were in the same position about eight months ago – all these beautiful cushions seemed to do was take up space! However my wife, being the ingenious one, suggested we cover the cushions

Hi Gary, thanks for setting the record straight that it was you, not Danny who first installed the membrane flush timer. My mistake. Congrats on your retirement! Kent S/V Kristy SM243

Hi all: In my early years of ownership of Liahona (Amel SM #335, purchased new July 2001), I would faithfully pickle the membranes with Sodium Metabisulfite (SMB). Since I was working back then I

Others have posted a belief that treating the membranes can damage the metal parts. Is it Sodium Metabisulfite that is the culprit? Because of these postings, I have had someone check on Kristy once

Duane, SOG is the manufacturer (SO Giant Oil Seal Co, Taiwan - a major supplier) and I'd guess whoever got that spare erred in getting one without a totally embedded metal insert. SKF is another

Duane, I purchased my 60x80x12 oil seal for the bowthruster tunnel here:

Hi, A package (dose) is 100 gram. You did wise buying the stuff in bulk. Desallator charges about 5 times more for the same quantity. Regards, Arno SV Luna, A54-121

No news so far. But Olivier told me, there are 4 (not 3) compartments, means 4 accesses. Good to know and not motivating :-). Best regards Stefan A54 / 119 / LADY CHARLYETTE / La Rochelle

Dear AMEL Group/ Owners, I want to sell my sunbed cushions/ upholstery for the sun deck (above the aft cabin) on my AMEL 54 - seen on the pictures. They are in a very good condition, like new. I