|
Re: B & G Depth Sounder
Hello Hajo:
My SM #335 has the depth sounder wired to the B & G Hydra 2000 computer at the nav station with orange/white wire going to terminal 30 and orange/green wire going to terminal 29. These
Hello Hajo:
My SM #335 has the depth sounder wired to the B & G Hydra 2000 computer at the nav station with orange/white wire going to terminal 30 and orange/green wire going to terminal 29. These
|
By
Gary Silver
·
#46682
·
|
|
B & G Depth Sounder
Hi Amelians,
I have a problem with the Depth Sounder, sometimes it works, sometimes it =
doesn't. So it is not really broken. I had cleaned the surface, but it is s=
till the same.
Any ideas ?
Thanks
Hi Amelians,
I have a problem with the Depth Sounder, sometimes it works, sometimes it =
doesn't. So it is not really broken. I had cleaned the surface, but it is s=
till the same.
Any ideas ?
Thanks
|
By
Hajo Hille
·
#46681
·
|
|
Re: Hoping to tour an Amel Santorin in USA
Hey Ian,
Thanks for the heads up about the aft berth. At 6'1" it may be a little tight, but I can't imagine ruling out the boat over that unless it totally egregious and I have to sleep in the fetal
Hey Ian,
Thanks for the heads up about the aft berth. At 6'1" it may be a little tight, but I can't imagine ruling out the boat over that unless it totally egregious and I have to sleep in the fetal
|
By
Will Marks
·
#46680
·
|
|
Re: Hoping to tour an Amel Santorin in USA
Sometimes I really wish this forum had a way of indicating a huge thumbs up for a particular post! What a great little nugget of information on the differences between models. I have been trying to
Sometimes I really wish this forum had a way of indicating a huge thumbs up for a particular post! What a great little nugget of information on the differences between models. I have been trying to
|
By
Brent Cameron
·
#46679
·
|
|
The Bow thruster seals are in
Below is the list of Amel owners that asked me to order the special seals, please let me know if I missed anyone. Although some of you have already sent me the info via different means, I need to
Below is the list of Amel owners that asked me to order the special seals, please let me know if I missed anyone. Although some of you have already sent me the info via different means, I need to
|
By
Jose Venegas
·
#46678
·
|
|
Re: Hoping to tour an Amel Santorin in USA
Will,
I think you will find that every Santorin owner on the owners site will say it is the right boat for them. For us it’s been perfect.
One question though is what height are you? At 5’10”
Will,
I think you will find that every Santorin owner on the owners site will say it is the right boat for them. For us it’s been perfect.
One question though is what height are you? At 5’10”
|
By
Ian Park
·
#46677
·
|
|
B & G Depth sounder
Hi Amelians,
I have a problem with the Depth Sounder, sometimes it works, sometimes it doesn't. So it is not really broken. I had cleaned the surface, but it is still the same.
Any ideas ?
Thanks
Hi Amelians,
I have a problem with the Depth Sounder, sometimes it works, sometimes it doesn't. So it is not really broken. I had cleaned the surface, but it is still the same.
Any ideas ?
Thanks
|
By
Hajo Hille
·
#46676
·
|
|
Re: Hoping to tour an Amel Santorin in USA
Hi Jean-Pierre,
I'm tracking the 8 you found on Yachtworld. The concentration of them in the Med is a big part of the impetus for why I want to view one in the US. We are open to the possibility of
Hi Jean-Pierre,
I'm tracking the 8 you found on Yachtworld. The concentration of them in the Med is a big part of the impetus for why I want to view one in the US. We are open to the possibility of
|
By
Will Marks
·
#46675
·
|
|
Re: More than you ever wanted to know about Amel steering
I will be doing something similar with rope, that looks great!
I have a different question about my composite wheel (SM 243 ‘98-‘99). The spokes have cracks in the composite between the sides and
I will be doing something similar with rope, that looks great!
I have a different question about my composite wheel (SM 243 ‘98-‘99). The spokes have cracks in the composite between the sides and
|
By
karkauai
·
#46674
·
|
|
Re: Manual Outhaul system
Ellen!
there is a rather easy way to set up a convenient back up system, i have been forced to do that two times.
Mount a block at the connection where the boom and mast meets. Take a line to the
Ellen!
there is a rather easy way to set up a convenient back up system, i have been forced to do that two times.
Mount a block at the connection where the boom and mast meets. Take a line to the
|
By
Paul Osterberg
·
#46673
·
|
|
Re: Manual Outhaul system
Would it be just as easy to replace the motor?
I’m sure Amel doesn’t wind their own motors, and someone knows the source?
~~~⛵️~~~Matt
Would it be just as easy to replace the motor?
I’m sure Amel doesn’t wind their own motors, and someone knows the source?
~~~⛵️~~~Matt
|
By
Matt Salatino
·
#46672
·
|
|
Manual Outhaul system
Hi,
We have had a number of issues with out mainsail outhaul motor and so we have had to macgyver a manual system more than once. We hope to fix/replace the motor but I'd like a more permanent
Hi,
We have had a number of issues with out mainsail outhaul motor and so we have had to macgyver a manual system more than once. We hope to fix/replace the motor but I'd like a more permanent
|
By
Ellen Cahill
·
#46671
·
|
|
Re: owner of SY Phantom
We have a Swetec hydrogenerator. Would not buy one again, very limited use. Only use it when sailing long distance about 300 nm or more. In Caribbean one has to continously clear it from see weed.
We have a Swetec hydrogenerator. Would not buy one again, very limited use. Only use it when sailing long distance about 300 nm or more. In Caribbean one has to continously clear it from see weed.
|
By
Paul Osterberg
·
#46670
·
|
|
Re: Hoping to tour an Amel Santorin in USA
Hello William,
First step is to look at Yachtworld.com and find the listed Santorins. I found 8… all in the Med. One of them caught my eye, the one listed with Michel Charpentier; he is almost
Hello William,
First step is to look at Yachtworld.com and find the listed Santorins. I found 8… all in the Med. One of them caught my eye, the one listed with Michel Charpentier; he is almost
|
By
Germain Jean-Pierre
·
#46669
·
|
|
Re: Hoping to tour an Amel Santorin in USA
Will,
It looks as if that Santorin in Martinique is actually sold.
--
Mark McGovern
SM #440 Cara
Deale, MD USA
Will,
It looks as if that Santorin in Martinique is actually sold.
--
Mark McGovern
SM #440 Cara
Deale, MD USA
|
By
Mark McGovern
·
#46668
·
|
|
Re: Hoping to tour an Amel Santorin in USA
Will,
Welcome to the group. There is a Santorin for sale in Martinique. I know it's not the US, but its a fairly easy trip from the US and it's listed at a fantastic price. Here is a link from the
Will,
Welcome to the group. There is a Santorin for sale in Martinique. I know it's not the US, but its a fairly easy trip from the US and it's listed at a fantastic price. Here is a link from the
|
By
Mark McGovern
·
#46667
·
|
|
Hoping to tour an Amel Santorin in USA
Hey all, I am hoping that someone in this group would be so kind as to give us a tour of their US-based Santorin.
My wife and I are on the hunt for our next cruising boat to take on an open-ended
Hey all, I am hoping that someone in this group would be so kind as to give us a tour of their US-based Santorin.
My wife and I are on the hunt for our next cruising boat to take on an open-ended
|
By
Will Marks
·
#46666
·
|
|
Re: owner of SY Phantom
Not to be negative, but ask specifically about fouling from sargasso weed.
~~~⛵️~~~Matt
Not to be negative, but ask specifically about fouling from sargasso weed.
~~~⛵️~~~Matt
|
By
Matt Salatino
·
#46665
·
|
|
Re: owner of SY Phantom
Hi Alex, I have just arrived at Jabin. Have you got hold of the owner? If not I’ll go to the office and try and get their details. I have a SM and am also interested in the watt and
Hi Alex, I have just arrived at Jabin. Have you got hold of the owner? If not I’ll go to the office and try and get their details. I have a SM and am also interested in the watt and
|
By
Alan Grayson
·
#46664
·
|
|
Re: Sterilize the watermaker
I was curious about this and emailed Desallator to confirm, and this is the reply I got from Martin de Jong:
Good morning Paul,
No this is not the proper way of doing it, this is a good
I was curious about this and emailed Desallator to confirm, and this is the reply I got from Martin de Jong:
Good morning Paul,
No this is not the proper way of doing it, this is a good
|
By
Paul Dowd and Sharon Brown
·
#46663
·
|