Oliver, you can get the JIC fittings at any good hydraulic shop. Fair Winds Eric Kimberlite Amel Super Maramu #376

Hi Gary, Automotive solenoids are not usually isolated ground solenoids. I would check it. Automotive solenoids usually have the negative side connected internally to the mounting ears. If this is

I thought the Pearl Islands was a much better cruising ground than the San Blas Islands. The big problem is that cruisers don't have a nice and cheap marina like Shelter Bay on the South side of

Yes, the Dessalator High pressure fittings are "3/8 inch JIC stainless steel fittings". JIC fittings are a type of flare fitting which is machined with a 37-degree flare seating surface. Best, CW

Hi All, I ran into same problem and the hose from high pressure pump came off before i could change my hoses. Does anybody know how these terminals are caled? What kind of connector is that? Since

Hello Lior, We have an SM but changed from the small size units the SM’s were fitted with to the “Euro standard sized Siemens IQ500.” It is a washer/dryer; we rarely use the drier function but

Similar scenario while we were underway. I managed to get that DC motor free and on to the cockpit floor. There were four little hard rubber covers that held the brushes in place and when I pried

Glad to hear that fixed your problem. It is awesome when the fix is a simple one. Chuck on S/V Joy taught me about the adjustment pot on the rear side of the control panel. All the Best, Paul

well, I have SHARONA since 7 year and never used the dryer. Now we are in Montenegro and it is first time that we had (in spring) many rainy days and everything was wet for days... in such a case it

You don’t need the dryer. Your laundry drues faster outside in the wind, and the do the ironing for you as well. Hälsningar/regards Ann-Sofie Svanberg S/Y Lady Annila SM232, 1998 Skickat från min

Hi all I am thinking about replacing the washing machine and dryer on my A54. Did anyone replaced it? can I ask to what model? There are also combined washing/dryer machine. What do you think about

Trident Marine makes adapters that go from US to European fittings and the other way around. They're available through Defender. I don't know if that would get your US tank filled, but if you had to

OK that indicates a problem with the motor, connections to the motor, or possibly a pulley gear issue. I think that if the one-way pulley gear was frozen you would see some jerky movement when you

Dear Paul Thank you so much for your advice. I could adjust it and now it is working perfect :-) Thanks again Lior

Same both sides of the relay Bill, as I’m charging it’s 26.2

You can probably rebuild it, as I did. Probably just a loose screw. Ken on Aquarius.

Also check to make sure your water maker is not sucking in Air. Ken

Hi gang, We have EU fibreglass bottles. No problem getting gas anywhere except NZ... We also have a « adapter kit » to connect our tanks to any fitting. Cheers from Fiji Jean-Pierre Germain,

Lior, Not sure if your thermostat is the same as mine, but on mine you can tune or adjust the temperature setting. My adjustment screw is on the back side of the control panel that is mounted on the

We are stocking up on spare parts for our S Pacific cruise. I am wondering about shelf life of the packing for the rudder stuffing box. In 10 years I have only had to tighten the nut about 1/8 turn