|
Re: VP MD22L
I already isolated the water heat exchanger. Still same.
getting the salt water result I checked the freeze point of the coolant versus the sea water. What was in the heat exchanger had the same
I already isolated the water heat exchanger. Still same.
getting the salt water result I checked the freeze point of the coolant versus the sea water. What was in the heat exchanger had the same
|
By
Bernd Spanner
·
#47049
·
|
|
Re: This should interest all members, especially Amel yacht owners
My wife and I are thoroughly enjoying our new Amel 50. Personally, I really appreciate the thought (Amel philosophy) that went in to designing our boat. As with anything man-made, our boat requires
My wife and I are thoroughly enjoying our new Amel 50. Personally, I really appreciate the thought (Amel philosophy) that went in to designing our boat. As with anything man-made, our boat requires
|
By
Theo s/v Paloma
·
#47048
·
|
|
Re: Bimini detail
James,
You do not search for Kerpa photos.
In the past some members named photos or albums names that had nothing to do with the photos.
Two of our members accomplished the enormous task of renaming
James,
You do not search for Kerpa photos.
In the past some members named photos or albums names that had nothing to do with the photos.
Two of our members accomplished the enormous task of renaming
|
By
CW Bill Rouse
·
#47047
·
|
|
Re: Bimini detail
Hi Mark,
No hard top on Kristy. I’ll post pics this afternoon.
Kent
SM 243 Kristy
Hi Mark,
No hard top on Kristy. I’ll post pics this afternoon.
Kent
SM 243 Kristy
|
By
karkauai
·
#47046
·
|
|
Re: This should interest all members, especially Amel yacht owners
Good point! A fun Amel pick-me-up for those on here considering an Amel.... met a very cool old French sailor last week, been around the world more than once, pulled up at the dock in a stunning
Good point! A fun Amel pick-me-up for those on here considering an Amel.... met a very cool old French sailor last week, been around the world more than once, pulled up at the dock in a stunning
|
By
Davi Rozgonyi
·
#47045
·
|
|
Re: washing machine and dryer for Amel 54
We replaced our bosch with the Beko. Outstanding machine and quite easy to replace. it works much better than our house washing machine. The hardest part is getting the machine to the boat!-if in the
We replaced our bosch with the Beko. Outstanding machine and quite easy to replace. it works much better than our house washing machine. The hardest part is getting the machine to the boat!-if in the
|
By
Porter McRoberts
·
#47044
·
|
|
Re: Bimini detail
Asking me? Yes we did. Doesn’t regrett it at all. Keeps the cockpit a bit cooler (and warmer in cold climate) as it is a sandwich construction. Perfect spot for solar panels. Not really satisfied
Asking me? Yes we did. Doesn’t regrett it at all. Keeps the cockpit a bit cooler (and warmer in cold climate) as it is a sandwich construction. Perfect spot for solar panels. Not really satisfied
|
By
Annsofie & Jonas Svanberg
·
#47043
·
|
|
Re: Bimini detail
Hi
My wife complained that I was developing a stoop standing at the helm trying to see around in our SM. Then I saw what Ian and Judy did in their SM 2000 Pen Azen, which had a single large vinyl
Hi
My wife complained that I was developing a stoop standing at the helm trying to see around in our SM. Then I saw what Ian and Judy did in their SM 2000 Pen Azen, which had a single large vinyl
|
By
Eamonn Washington
·
#47042
·
|
|
Re: Shore power contactor burnt out
Hi Eric
The contactor is an automatic switch that selects either the power from the shore or the generator. The manual switch does the same job, just manually. I bought a Schneider Electric rotary
Hi Eric
The contactor is an automatic switch that selects either the power from the shore or the generator. The manual switch does the same job, just manually. I bought a Schneider Electric rotary
|
By
Eamonn Washington
·
#47041
·
|
|
Re: VP MD22L
That seems reasonable, Eric. It does seem a long shot and one I certainly haven't encountered. So if there is a leak in the water heater heat exchanger I guess it could force fresh water into the
That seems reasonable, Eric. It does seem a long shot and one I certainly haven't encountered. So if there is a leak in the water heater heat exchanger I guess it could force fresh water into the
|
By
Craig Briggs
·
#47040
·
|
|
Re: VP MD22L
Hi again Bernd,
if your heat exchanger has rubber end caps it is high level probability that there is the problem. Tighten the hose clamps as a first try. I had that once on a previous boat and
Hi again Bernd,
if your heat exchanger has rubber end caps it is high level probability that there is the problem. Tighten the hose clamps as a first try. I had that once on a previous boat and
|
By
Danny and Yvonne SIMMS
·
#47039
·
|
|
Re: VP MD22L
On second thought. If the engine is running and a faucet is running, just before the fresh water pump goes on, Isn’t it possible to get antifreeze in the hot water tank?
Fair
On second thought. If the engine is running and a faucet is running, just before the fresh water pump goes on, Isn’t it possible to get antifreeze in the hot water tank?
Fair
|
By
eric freedman
·
#47038
·
|
|
Re: VP MD22L
Craig,
That is an excellent idea. I wish I had thought of that.
Eric
Craig,
That is an excellent idea. I wish I had thought of that.
Eric
|
By
eric freedman
·
#47037
·
|
|
Re: VP MD22L
Then that has to be the problem.
Fair Winds
Eric
Kimberlite Amel Super Maramu #376
Then that has to be the problem.
Fair Winds
Eric
Kimberlite Amel Super Maramu #376
|
By
eric freedman
·
#47036
·
|
|
Re: VP MD22L
Hi Bernd,
Per my and others' earlier posts, most likely it is the rubber end caps on the heat exchanger or the heat exchanger itself. But thinking about it more, how do you know it is salt water and
Hi Bernd,
Per my and others' earlier posts, most likely it is the rubber end caps on the heat exchanger or the heat exchanger itself. But thinking about it more, how do you know it is salt water and
|
By
Craig Briggs
·
#47035
·
|
|
Re: VP MD22L
No intercooler, oil cooler or transmission cooler on this engine. Has to be either the rubber end caps on the heat exchanger with their two hose clamps or a leak inside the heat exchanger tubes.
No intercooler, oil cooler or transmission cooler on this engine. Has to be either the rubber end caps on the heat exchanger with their two hose clamps or a leak inside the heat exchanger tubes.
|
By
Craig Briggs
·
#47034
·
|
|
Re: Bimini detail
Pardon my ignorance, but how do you search for your “Kerpa” photos? I do not see a search option when opening the photos page.
Thank you.
-James
Pardon my ignorance, but how do you search for your “Kerpa” photos? I do not see a search option when opening the photos page.
Thank you.
-James
|
By
James Cromie
·
#47033
·
|
|
Re: This should interest all members, especially Amel yacht owners
Thanks Bill,
And thank you to all members. We are missing our Santorin. She’s sitting in Borneo with a house keeper as we decide to take a ‘land job’ for family reasons. But giving up the
Thanks Bill,
And thank you to all members. We are missing our Santorin. She’s sitting in Borneo with a house keeper as we decide to take a ‘land job’ for family reasons. But giving up the
|
By
tfortner1975
·
#47032
·
|
|
Re: Dessslator HP hoses
Eric is correct and JIC fittings are worldwide for hydraulic hoses.
Best,
CW Bill Rouse
Yacht School (formerly Amel School) - Supporting Amel Owners
720 Winnie St
Galveston Island, TX 77550
+1(832)
Eric is correct and JIC fittings are worldwide for hydraulic hoses.
Best,
CW Bill Rouse
Yacht School (formerly Amel School) - Supporting Amel Owners
720 Winnie St
Galveston Island, TX 77550
+1(832)
|
By
CW Bill Rouse
·
#47031
·
|
|
Re: VP MD22L
If you have a intercooler, oil cooler, or transmission cooler, it could be one of these.
Fair Winds
Eric
Kimberlite Amel Super Maramu #376
If you have a intercooler, oil cooler, or transmission cooler, it could be one of these.
Fair Winds
Eric
Kimberlite Amel Super Maramu #376
|
By
eric freedman
·
#47030
·
|