I've read with great interest the insightful posts of the group on this topic. Like most Amelians, I envision L'ORIENT (SM2K 422) with a lithium battery system in the future. But when ? This space

Dear forum, Our Amel 54 is the first sailboat we own that lacks a boom vang. Why is this? I notice the A55 and the A64 both do have a vang and I think I've seen some SMs with a vang as well. How do

Hello everybody We are new to the Group, sailing this Autumn with our Super Maramu “Galatea” from Rome to Sicily.This is our first post in the group. Oliver , we made our winter enclosure two

Aras, We have 17 people at our table for 16 ,but I would think you could reserve a table next to us. There may be others that may want to join you as well. Certainly is a lot of Amels on the Bay this

Is it too late for dinner? Vickers and I would to join you. Aras & Vickers -- Aras Grinius SV FIASCO Sharki #163

Hi Jose, Please send me your email address to Kimberlite@... Thanks Eric

Hi Jose, This is probably the third time in 11 years I have done an in water, between haul-out lip seal replacement. Just routine. As soon as I see a trace of water I act. Hasn't happened too often

Hi Danny, Good luck with your seal. It could have been a bad seal but it is also possible that the shaft is no longer lined up and over time the seals get deformed and looses its lip tension. At

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the main@AmelYachtOwners.groups.io group. File: Stella Instrumentation Diagram

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the main@AmelYachtOwners.groups.io group. File: Stella Instrumentation Diagram April

I have also taken this approach with a machine shop Interested to know how people approached it as originally if was an interference fit How did you reassemble the disk onto the pin? As a temp

Hi Tom, You mention "Getting them (the swivels) out of the mast is the work". I'm at this point. Would you kindly describe the steps you took to remove the pinion as that appears to be the final

Yes, but in my experience the 20 meter standard cable length is not quite long enough to get to the B&G junction box, and there is very little difference in the 213 Masthead Mount with 20m of cable

Hi Oliver, the AMEL 54 main mast length is 18.50 m. Olivier

Oliver, The transducer is a B&G 213MHU and is available from https://www.aandtinstruments.com/ The transducer is repairable and parts are available The transducer is connected to the B&G 213 Mount

Hi Jose Sounds a good system. So far the standard amel seals have done the job for me. I have just done an in water lip seal change I always carry a spare. A slight leak had developed on the sail

Vickers and I will also be around the boat show. Since we’re locals if anybody needs questions answered let us know. Aras & Vickers S/v Fiasco -- Aras Grinius SV FIASCO Sharki #163

Hello, I need to fit a new wind transducer ontop of my mast. For the cable length I will need the length of the mast from deck to masttop not incl. Antennas. Does anybody know it? Oliver

We r just going to build a winter enclosure. Any hints that we should care for? Do you have some fotos? Oliver A54#39 Portugal Sent from my Huawei Mobile

Hello, We got 1 fridge and freezer in our boat, we gave the freezer in the pantry a complete refit. 1. Step is to refit AMEL freezer insulations. We removed the complete old imsulation. Sorry to say