Thanks Kent Where are you now and where are you headed? Fair Winds Eric

Hi Eric. They are 25mm across the base and12mm high. Kent SM 243 Kristy  Hi Kent, Thanks for the photos. What are the dimensions of the seals? Fair Winds Eric Kimberlite Amel Super Maramu

Good Afternoon, After discussing with another AMEL owner before leaving NEW CALEDONIA early May 2019 for VANUATU I decided to inspect & possibly reverse my OEM SS chain. I also expected it to be a

Hi David, Yes! I also have this problem. Last year I dropped it all in deep water, and bobbed around for an hour hoping to untwist it, but this year the problem was back. I have galvanised chain and

Hi does anyone know the part number for the Lewmar hatch stays in the Main saloon they are the telescopic type I believe Thanks Courtney Trippin 54 #101

Oliver, If possible, I'd love to see photos of this setup. It sounds like a brilliant solution. Also, could you tell us more about the intelligent controller that tries to "bundle" when the

Craig, Sorry for the late kudos. This one line led me to my problem. The valve was sticky and stayed depressed. I took it apart, cleaned it and all appears good now! However, the oven doesn't flow

Thanks for the info Kent. Yep...still in Hawaii until June next year, and will sail away then. Steve

Thanks

Eric- 2 cans does 3 coats.

Hi Tom, How much polytrol is needed to do the entire boay? Fair Winds Eric Kimberlite Amel Super Maramu #376

Hi Kent, Thanks for the photos. What are the dimensions of the seals? Fair Winds Eric Kimberlite Amel Super Maramu #376

Oh Mark- on your last question, have never used it on the run rail. We clean that with Vaseline every few months and the red comes back nicely. Tom and Kirstin SV L'ORIENT SM2K 422

Mark- this is what I used. Bought a case of it from a Dutch paint store in Bonaire. The pic I posted was of my sun-bleached deck locker half treated with polytrol (which was fully dry). Joel- as usual

Hi Tom and Mark. I have used Polytrol with good results for decades and it does what they say it will. One caution. Painters absolutely hate this stuff. The reason Polytrol works so good is it is not

Hi Steve, I paid 8.70€/M plus shipping. I’m not sure she has enough to do another boat. She couldn’t tell me anything about it when I was placing my order. Said she had Some of several

Tom, Looks great! I might have to give that a try. I did find something called Polytrol on Amazon

What are we looking at here, Thomas? Is the photograph of outboard sun-bleached and inboard fresh polytrol? Has anyone looked at the faux teak material that is custom manufactured to fit and glued

Hi Kent, What is Amel charging per meter for the material? Thanks, Steve Aloha SM 72 Hawaii

I got the seals from Maud at Amel France. They are half-round with a stiff bottom and what I think is neoprene rounded top. The top is very soft and appears to be exactly the same as the originals.