Fresh water to toilet bowl If you want to do that you should remember that on a live ship the fresh water system is constantly pressurised and therefore fresh water will be continuously seeping

For your information and in case you have similar problem : The Onan technician changed the AVR printed circuit board on the geneset and promised that the leak problem has been solved. Everything

"Sugar" JY. Selo is the head of Amel After-sales Department. Phone: +33(0)546 55 17 31 Fax: +33(0)546 45 43 03 Email: amel@... What you are after is: Jeu de silentblocs

Hi, Thanks for the feedback. It seems that the problem is in the generator circuit. The Onan representative promised to replace a printed circuit that might solve the problem. I will let you know

Thanks Adam, Appreciate the advice. Perhaps you have contact details of who in Amel we should ask as we did send Amel an email with on response. Thanks for the help. Regards Chris &

If the battry goes flat so quickly then there must be problem with some component of the main engine or genset.If it were me I would call in a diesel mechanic. We have left our SM319 Bali Hai for

There is a switch under the nav station on kimberlite that must be turned off when i leave her. this switch runs the memory on the stereo, electronic barometer, and other things on the boat. it is

"Sugar" Not sure about your Sharki, but on my Mango Amel with a Perkins 4- 236, Amel made the engine mounts in-house. They are very good mounts and when it was time to replace the rubber

Hi, You really must have a problem with the 12V circuit. I have left Crusader for a month without any problem starting either the main engine or generator. I would suggest that you start the gen set

We have a 1980 Sharki with a Perkins 4108 and the rubber in the back engine mounts has deteriorated. Does anyboody know whether these are a Perkins part or do they come from Amel. If so who do we

I had the same problem with the 12 V engine starting battery early August. I have followed the Amel instructions and I have replaced the battery ( which was paid by Amel) as it was discharged

Hi Vito, take a few pump impellors, anodes and I would also recommend a spare 10 ohm ballast resistor that is in the fuel solenoid valve circuit. It is located inside the control box and mine broke

I have a 3 year old OEM 150% sail for a Super maramu that I would like to sell. The sail is in very good shape and has plenty of life left in it. Price $1100.00 Contact me VCMS@... Thank

Hi I am seeking recomendations for a spare parts inventory for the Onan Gen set. What has broken down and what parts that you did not have that you wished you did. Thank you Vito Ciaravino ASM

Thanks. I've sent an email to USSAILING.ORG (formerly USYRU) to see if they have a 'Performance Package' on the Super Maramu. They have quite an extensive database of yachts with this performance

I am neither a computer whiz nor a decent helmsman but here is a solution to your problem. Purchase "The Capn" Navigation Software and the appropriate electronic charts for your area. Look at the

A couple of years ago I asked La Rochelle if they would share the polar diagram. They said they did not have any. As a user of MaxSea (Navigation Software developped by "Informatique & Mer", I then

We have SM 302, Pen Azen.we are spending this winter in the Caribbean with a view to transiting Panama in May or so and then leaving the boat in a secure dock either afloat or ,preferably, ashore

Hi Paddy, thank you so much for the dimensions. I take it that you meant Cms not Mms! I did not know that you had taken delivery yet. Where are you now? Happy New Year to you and all Amel

wrote: need to know the inside dimensions of the space under the bottom companionway step. That is the height from the removable floor panel under the step to the underside of the bottom step, and