That the lid to the c-drive oil reservoir and associated gasket. Porter iBIS 54-152 Excuse the errors. Sent from my IPhone Www.fouribis.com

Are you sure it doesn’t fit?? Pm Excuse the errors. Sent from my IPhone Www.fouribis.com

Hello Thomas, When I ordered some from Hardellet in 2015 the reference number was BDP 20000 24V Cheers Alan Elyse SM437

See the black gasket in the attached picture. It was found inside the C-drive oil reservoir. At first glance I thought it was the gasket for the top, but obviously not. It is too large. I think I

James, I got mine from US Distributor: Drivetech Automation; 5401 NW 102nd Ave #146; Sunrise, FL33351 954.746.9800. They were $220 each plus tax & shipping (a few years ago). You will have to grind

finally removed it. what you need is a puller, a hammer and 6 hours :-) . alignment was easy then using the tool. santorin owners with a shaft alternator: the "special tool" should be 45 mm longer

We have instalt in the summer the Spade 200 in Aluminium with 26 kg he works for boats by 30 Tonns and 25 m for the second Anker we by a Spade 140 In Aluminium for boats 20 Tonns and 20 m For the

Does anyone have the precise product number for the mast solenoids ? I'd like to carry some as spares. Thomas Kleman SV L'ORIENT SM2K 422 Shelter Bay, Panama

Craig, Thanks a lot for the help. If there is a supplier that you like to use for ordering these please let me know. Best, James SV Sueno Maramu #220

Here are some links for the Neco: https://topperdiek.de/dl/Amel/NECO_692_quick_start.pdf https://topperdiek.de/dl/Amel/NECO-komplet-Manual.pdf https://topperdiek.de/dl/Amel/Neco-Marine-Autopilot.pdf

Welcome Walter I bought 3 years ago a Sharki also. My build number #60 is also from 1982. Most instructions I got from the internet and was found with Google. These old boats are differently equipped.

Hi Janine and Walter, welcome here in this great group and good time with your wonderful ship :-). I'm the proud owner of the 1981 Sharki Baghira (Nr: 42). I attach two manuals for the Perkins 4108.

Hello Jer, This gentleman did an insurance survey on Aletes. And I know he did at least one other Amel. We found him thorough, easy to work with, and good quality report. Mike Ondra Aletes

Hi Jeff, On our boat the compressor is mounted underneath the refrigerator, underneath the chest refrigerator/freezer, and to the port side of the refrigerator/freezer under the salon seat. The

Hi Jeff, If you are referring to the freezer under the saloon dining table seat the compressor is in the compartment next to it under the corner seat. For the chest freezer under the galley worktop

Good Morning Amelians, I'm having issues with my refrigeration on my Amel 54. There are 2 freezers and the reefer aboard Spirit. The circulator pump which supplies water to all units is activated by

Hey there, wiser minds than mine will answer I'm sure, but I'm just here to remind you to get or make that alignment blank for this job. Skilled professionals were unable to align mine without

today I tried to align the engine and the c-drive. unfortunately I was not able to remove the vetus coupling from the shaft, tried it also with a puller but without success. Are there any tricks,

Hi James, That looks like the standard reduction gear on Amels of that era, like my SN. If so, it may be a Bonfiglioli Model VF44 Configuration P1 70 P63 B14 B3, which is readily available from many

Hello fellow Amelians, I would like to locate spare gearboxes for the main mast and boom curlers on my 1987 Amel Maramu. Amel has not been able to help me with this since my spars are by Nirvana