I got mine from Amel. Fair Winds Eric Amel Super Maramu #376

Hi, Here is the photo. Once you have it apart have a machine shop open up the hole a few thousands of an inch. Fair Winds Eric Amel Super Maramu #376

Moin Gerhard, many thanks :-) Best Ralf

Bill , Might the gasket fit over the threaded opening and rest on top of the reservoir and the cap tighten down on top of it ,I see black marks on the bottom of the cap as though it had been in

Craig, I am amazed that you found a US source for these boxes! Thanks for sharing, I have added this information to my Sueno file. I will be in Florida myself pretty soon and will follow up.

Hi Bill. I would suggest it goes under the cap. Sometimes the material used expands with age. Regards and wishing you and Judy all the best for Christmas and the new year. I hope your new career

Hi Jer, I have used this person. He did a thorough job for me in RI. I was impressed and I recommend him. WILLIAM COBLE Independent Marine Surveyor P.O. Box 1434 North Kingstown, Rhode

Porter, Yes, it doesn't fit. The gasket is too large. Best, CW Bill Rouse Amel Owners Yacht School - www.AmelOwnersYachtSchool.com 720 Winnie St Galveston Island, TX 77550 +1(832) 380-4970

That the lid to the c-drive oil reservoir and associated gasket. Porter iBIS 54-152 Excuse the errors. Sent from my IPhone Www.fouribis.com

Are you sure it doesn’t fit?? Pm Excuse the errors. Sent from my IPhone Www.fouribis.com

Hello Thomas, When I ordered some from Hardellet in 2015 the reference number was BDP 20000 24V Cheers Alan Elyse SM437

See the black gasket in the attached picture. It was found inside the C-drive oil reservoir. At first glance I thought it was the gasket for the top, but obviously not. It is too large. I think I

James, I got mine from US Distributor: Drivetech Automation; 5401 NW 102nd Ave #146; Sunrise, FL33351 954.746.9800. They were $220 each plus tax & shipping (a few years ago). You will have to grind

finally removed it. what you need is a puller, a hammer and 6 hours :-) . alignment was easy then using the tool. santorin owners with a shaft alternator: the "special tool" should be 45 mm longer

We have instalt in the summer the Spade 200 in Aluminium with 26 kg he works for boats by 30 Tonns and 25 m for the second Anker we by a Spade 140 In Aluminium for boats 20 Tonns and 20 m For the

Does anyone have the precise product number for the mast solenoids ? I'd like to carry some as spares. Thomas Kleman SV L'ORIENT SM2K 422 Shelter Bay, Panama

Craig, Thanks a lot for the help. If there is a supplier that you like to use for ordering these please let me know. Best, James SV Sueno Maramu #220

On Wed, Dec 11, 2019 at 04:29 PM, Ralf Schroeder wrote: But I'm searching for a manual for the original autopilot with panel etc. myself. So, when somebody can help us, I'm very happy, too.Here are

Welcome Walter I bought 3 years ago a Sharki also. My build number #60 is also from 1982. Most instructions I got from the internet and was found with Google. These old boats are differently equipped.

Hi Janine and Walter, welcome here in this great group and good time with your wonderful ship :-). I'm the proud owner of the 1981 Sharki Baghira (Nr: 42). I attach two manuals for the Perkins 4108.