Arno, A portable wet dry vac that can suck up screw drivers out of the bilge? It sounds like you may possibly have found the Ultimate “Amel Vacuum”! Bill R. has pointed out many times on the

This is a very good process! Thank you Arno! We would like a high pressure water sprayer (looking for a small one) but good dockside pressure can work as well. A little simple green overnight in

Most of us really like our Amels. We like the clever way it has been thought out and such. However some choices have their drawbacks. My least favorite parts to clean on our 54 are the Grey water

I called Tides this morning and they plan to ship the hose to me today for delivery tomorrow. Anyone know what size flax to use with the stock stuffing box ?

As a Sharki owner (163) I spoke to Bill Rouse about adding sections in for Maramu’s and Sharki’s. He thought it might be a good idea. If you perform repairs you need to document the steps you

Amazonhose.com. it’s in north miami.

Alex, They may refurbish your existing motor. You would need to remove it, and ship it to them. They would look it over to determine whether it is worth doing or not and let you know their opinion.

Thanks Mark, your information was helpful. Best Regards, Jeff

Thanks Bill Danny

Hello Stephan, It's nice to hear from you. I remember the handover of your SM in la Rochelle... How many nautical miles since? The 2 to 50 ohms findings look like a bad contact issue. First check your

Danny, you are correct. Best, CW Bill Rouse Amel Owners Yacht School - www.AmelOwnersYachtSchool.com 720 Winnie St Galveston Island, TX 77550 +1(832) 380-4970

Pat I think you have it. Thanks Best, CW Bill Rouse Amel Owners Yacht School - www.AmelOwnersYachtSchool.com 720 Winnie St Galveston Island, TX 77550 +1(832) 380-4970

Thanks Matt. I will give them a call tomorrow...

Thanks Matt, I was not aware that they carried that hose. I will call them tomorrow and see if its recommended for the application. Stay tuned....really appreciate the assistance

I sent this 1 1/2 hours ago: I did a quick search and found one in the US: https://www.tidesmarine.com/shaftseals/straight_hose.php ~~~⛵️~~~Matt

James or Wade, were you able to find the shaft tube hose in the US anywhere? I cannot find a supplier for the 2 1/8 or 54 mm size hose....

I did a quick search and found one in the US: https://www.tidesmarine.com/shaftseals/straight_hose.php ~~~⛵️~~~Matt

Mike, I have what I would call a "European" spec SM so I don't even have a pumpout riser in my holding tank at all. I just have a hole in the deck with a plug. I actually had to make a hose with a

Hi Mark. Thanks. And this is for others who may have a configuration nearer to ours. I believe the pumpout riser is probably the same. However In our hull #240, with manual pump, the riser from the

Hello all. I am looking for a source for 54mm stern tube hose for my stuffing box on my 1985 mango. 54 mm is equal to 2 1/8 inches. Preferably a U.S. supplier as we are located in the US and need it