|
Re: A54 fridge circulation pump
Hello all,
It seams that the gentle flow of the fridge cooling circuit running 80% of the time is the perfect environment for barnacle growth. This includes the raw water strainer as it too will have
Hello all,
It seams that the gentle flow of the fridge cooling circuit running 80% of the time is the perfect environment for barnacle growth. This includes the raw water strainer as it too will have
|
By
Nick Newington
·
#49873
·
|
|
Looks like Amel hit one out of the box.
I hear that
” Amel 50’s are selling out. I just sold one last month and it is not going to deliver until October 2021. Amel is requiring a €300,000 deposit to claim a production slot. The
I hear that
” Amel 50’s are selling out. I just sold one last month and it is not going to deliver until October 2021. Amel is requiring a €300,000 deposit to claim a production slot. The
|
By
eric freedman <kimberlite@...>
·
#49872
·
|
|
Re: A54 fridge circulation pump
Arno,
I am confused – I know that on the controller it mentions 12/24 volt but with the 3 Flojet pumps I purchased over the last year or so I always made sure they were 24 volt units. Do I need
Arno,
I am confused – I know that on the controller it mentions 12/24 volt but with the 3 Flojet pumps I purchased over the last year or so I always made sure they were 24 volt units. Do I need
|
By
Teun BAAS
·
#49871
·
|
|
Re: A54 fridge circulation pump
Hi Arno,
In your message below “On the other hand the continuous flow of water makes keeps growth of whatever wants to settle in the circuit also minimal. “ I was of the same opinion and
Hi Arno,
In your message below “On the other hand the continuous flow of water makes keeps growth of whatever wants to settle in the circuit also minimal. “ I was of the same opinion and
|
By
Teun BAAS
·
#49870
·
|
|
Re: A54 fridge circulation pump
I also had at least 3 Flojet pumps going out on me since Q1 2018; usually the freezer temperature would go up - over 1 ½ year period in NEW CALEDONIA the freezer unit was checked for leaks & serviced
I also had at least 3 Flojet pumps going out on me since Q1 2018; usually the freezer temperature would go up - over 1 ½ year period in NEW CALEDONIA the freezer unit was checked for leaks & serviced
|
By
Teun BAAS
·
#49869
·
|
|
Re: Repairing holes in aft cabin trunk / deck
Congratulations! Rascal is a good vessel.
In my opinion, I’d leave well enough alone because the LR is easily accessible ans easily deployed from this location. Try repealing the bolts with
Congratulations! Rascal is a good vessel.
In my opinion, I’d leave well enough alone because the LR is easily accessible ans easily deployed from this location. Try repealing the bolts with
|
By
Germain Jean-Pierre
·
#49868
·
|
|
Repairing holes in aft cabin trunk / deck
Greetings All. My family and I are excited to be the new owners of Rascal. I've been following this forum for over a year and am impressed by, and appreciative of, all the knowledge that Amel owners
Greetings All. My family and I are excited to be the new owners of Rascal. I've been following this forum for over a year and am impressed by, and appreciative of, all the knowledge that Amel owners
|
By
Kevin Fox
·
#49867
·
|
|
Re: Mango Bonding
BTW I did look through the forum's files and photos and there were references to wiring diagrams in the post, I could not find them in the files or pic section.....
BTW I did look through the forum's files and photos and there were references to wiring diagrams in the post, I could not find them in the files or pic section.....
|
By
Arlo Bess
·
#49866
·
|
|
Mango Bonding
Hello all, Since our 1985 Mango was hauled out for a new cutlass bearing and bottom paint, I thought I'd check the bonding system. The strap in the bilge was corroded, as suspected and will be
Hello all, Since our 1985 Mango was hauled out for a new cutlass bearing and bottom paint, I thought I'd check the bonding system. The strap in the bilge was corroded, as suspected and will be
|
By
Arlo Bess
·
#49865
·
|
|
Re: Sailing higher latitudes
I am enjoying the high latitudes chat. Thank you for your stories. Hoping for more.
Mark
Sea Hobo
Sharki #96
Sent from my Samsung device
I am enjoying the high latitudes chat. Thank you for your stories. Hoping for more.
Mark
Sea Hobo
Sharki #96
Sent from my Samsung device
|
By
marklesparkle59
·
#49864
·
|
|
Re: Sailing higher latitudes
Thank you for your reply Ian, Judy and Peter. That is very encouraging that an SM would cope well in higher latitudes (provided adequate heating was on hand). I know all too well the central heating
Thank you for your reply Ian, Judy and Peter. That is very encouraging that an SM would cope well in higher latitudes (provided adequate heating was on hand). I know all too well the central heating
|
By
Orion Martin
·
#49863
·
|
|
Re: A54 fridge circulation pump
Hi All,
After 3 flojets (full time liveaboard, typically running 1fridge+1 freezer, lifespan 8-14mths), we have installed and been running on the Marco UP-2P 24v for a 1.5 months, as recommended
Hi All,
After 3 flojets (full time liveaboard, typically running 1fridge+1 freezer, lifespan 8-14mths), we have installed and been running on the Marco UP-2P 24v for a 1.5 months, as recommended
|
By
Sv Garulfo
·
#49862
·
|
|
Pump
Hi together!
I had this German pump in use for many years on my traditional wooden Charter Vessel.
It works 24/7 with 12 people on board.
I never got any problems with
Hi together!
I had this German pump in use for many years on my traditional wooden Charter Vessel.
It works 24/7 with 12 people on board.
I never got any problems with
|
By
Stefan and Anne Deerberg
·
#49861
·
|
|
Re: A54 fridge circulation pump
I have had many, many motor failures using the Flojet pumps you all are referencing - often they last less than a year. In many instances the failures have caused my refrigeration units to shut down,
I have had many, many motor failures using the Flojet pumps you all are referencing - often they last less than a year. In many instances the failures have caused my refrigeration units to shut down,
|
By
Jamie Wendell
·
#49860
·
|
|
Re: SM leaking ATF fluid
#solution
Bill
Many thanks for your speedy reply. I believe it's the seal that has gone as that is where it is leaking from. I will have a go at changing it.
Many thanks for your help.
Rob
FORESIGHT SM #152
Bill
Many thanks for your speedy reply. I believe it's the seal that has gone as that is where it is leaking from. I will have a go at changing it.
Many thanks for your help.
Rob
FORESIGHT SM #152
|
By
Rob Smith
·
#49859
·
|
|
Re: SM leaking ATF fluid
#solution
Rob,
I have not personally experienced this issue. Your ZF 25 holds 0.75 liters of fluid. Is it possibly overfilled? You do not screw in the dipstick to check the level.
If not, it probably is a worn
Rob,
I have not personally experienced this issue. Your ZF 25 holds 0.75 liters of fluid. Is it possibly overfilled? You do not screw in the dipstick to check the level.
If not, it probably is a worn
|
By
CW Bill Rouse
·
#49858
·
|
|
Re: SM leaking ATF fluid
#solution
Hello
It is a easy repair, you must open the 4 screws besides the lever and mount a new radial sealing ring (SD 20x26x4) see foto. The sealing is part nr. 8
Leo
SM YinYang # 69 Fiji
Von meinem iPad
Hello
It is a easy repair, you must open the 4 screws besides the lever and mount a new radial sealing ring (SD 20x26x4) see foto. The sealing is part nr. 8
Leo
SM YinYang # 69 Fiji
Von meinem iPad
|
By
Leopold Hauer
·
#49857
·
|
|
SM leaking ATF fluid
#solution
Hello I have ATF fluid leaking from the gear lever on my gearbox.
Any suggestions?
Rob smith
Foresight
SM#152
Hello I have ATF fluid leaking from the gear lever on my gearbox.
Any suggestions?
Rob smith
Foresight
SM#152
|
By
Rob Smith
·
#49856
·
|
|
Skarki Headspace / Celing Height
Hello,
as a potential owner of a Sharki from 1982 I am interested in knowing:
1. salon headspace (ceiling height)
2. dimension of mattress (sleeping surface) in rear cabin when maximized.
Cannot find
Hello,
as a potential owner of a Sharki from 1982 I am interested in knowing:
1. salon headspace (ceiling height)
2. dimension of mattress (sleeping surface) in rear cabin when maximized.
Cannot find
|
By
MATTHIAS GRAWE
·
#49855
·
|
|
Re: Sailing higher latitudes
Hi Orion,
When we owned Pure Magic (433) we sailed her from Ireland to Antarctica and back. We had an eberspacher heater fitted from new and apart from it breaking down for one 24 hour period (due to
Hi Orion,
When we owned Pure Magic (433) we sailed her from Ireland to Antarctica and back. We had an eberspacher heater fitted from new and apart from it breaking down for one 24 hour period (due to
|
By
Peter Killen <peterkillen@...>
·
#49854
·
|