Over the decades with Amel, I sometimes sat in on part of the week long schooling each new Amel owner received as well as the somewhat shorter training I got on the three new ones I owned. The Amel

Very important and astute observation. We do the same. Luckily we have little ladies who get paid for a weekly clean out of the salt water system. Also, first time I started the engine with Bill Rouse

I have that very sound and yes it is annoying. Looking to do a flush. This is the kind of tips we Amel owners need more of. Thank you. Randall A-54#56

We had it made buy a machine shop in Turkey, I think they used Lexan. maybe less than 50 Euro SN120, herbert

Here is the detailed write up, of what we did, when we had this issue a year ago. We are quite happy with it! Amel Mainsail Foil Repair Amel Mainsail Foil Repair How to repair a cracked mainsail

I believe that this part is made of Delrin. I took a cracked one to a machinist, who made two of them for me. Materials and labor came to $250US. Kent SM 243 Kristy Bahamas heading South

Yes, I think I remember it going through. Thanks! Best, CW Bill Rouse Amel Owners Yacht School - www.AmelOwnersYachtSchool.com 720 Winnie St Galveston Island, TX 77550 +1(832) 380-4970

Well Bill, I missed your note above, but I think my donation went through. Happy to support.- 3 years is not a bad thing. Jamie Wendell Phantom A54

I have noticed the same thing. What you are noting is really important. I listen every time I start the engine. Jamie A54 #44 Phantom

Hi all, Over the few years we have owned Garulfo, we came to notice that the anti siphon vent for the engine that exits in the starboard cockpit drain hole was a good tell tale of a restriction in the

Alan, Thanks for confirming that the toilet should be bonded. My boat did not come with a leak detention device ,wish it had. While eroding zincs is normal ,mine are eroding in about 1/3 the time that

At Island Water World, it is $650 per month. $1068 is 64% more than $650, not exactly (what I consider as) "slightly" more... but again was, probably is now again, a nice property.

The rate for 31 days was $1067.95.

Hello, yes Amel drill holes to fit and also reduce the cooling fins depth. Regards Jp, Amel Santorin 51, Vanille

I'm working on the same thing. Not a full crack like this but it is there. I think amel still has this part

Did amel drill holes to mount the motor. Here is my old one. Looks like holes drilled by amel. Sn. Number 86.

Just air and the copper water tubes next the hull. We opened it up to store bedding I'm vaccum bags and pasta.

Sent from my Samsung Galaxy smartphone. 5. Xq

Sent from my Samsung Galaxy smartphone.

any one know the exact part number for the outhaul gear box. I ordered one from drive tech as spare and when trying to put the motor on, the bolts for the motor do not align with the gearbox.