|
Re: genoa sheet track end cap/pulley block
Thanks Alan and Mike,
Looks like Annie is slightly different that #23 and #437 in that there was no eye bolt and the stud is threaded on the top, with no bolt head. Maybe previous owner
Thanks Alan and Mike,
Looks like Annie is slightly different that #23 and #437 in that there was no eye bolt and the stud is threaded on the top, with no bolt head. Maybe previous owner
|
By
John Clark
·
#50293
·
|
|
Re: genoa sheet track end cap/pulley block
Eye bolt is to connect the preventer.
Best,
CW Bill Rouse
Amel Owners Yacht School - www.AmelOwnersYachtSchool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970
Eye bolt is to connect the preventer.
Best,
CW Bill Rouse
Amel Owners Yacht School - www.AmelOwnersYachtSchool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970
|
By
CW Bill Rouse
·
#50292
·
|
|
Re: Replacement windscreens
Barry,
They used my old ones as template for the new ones, and made them identical in every respect, holes, grooves etc, except for the very slight curve but that has not been a problem and I’m
Barry,
They used my old ones as template for the new ones, and made them identical in every respect, holes, grooves etc, except for the very slight curve but that has not been a problem and I’m
|
By
Paul Dowd and Sharon Brown
·
#50291
·
|
|
Re: Replacement windscreens
Hi Paul,
Thank you for this contact, we have just arrived in Barbados and will be going to Grenada sometime soon.
I am looking to get mine replaced after some acid type liquid was dropped over mine
Hi Paul,
Thank you for this contact, we have just arrived in Barbados and will be going to Grenada sometime soon.
I am looking to get mine replaced after some acid type liquid was dropped over mine
|
By
Barry Connor
·
#50290
·
|
|
Re: genoa sheet track end cap/pulley block
Hi John,
If yours is like ours, which I'm sure it probably is, the bolt, in our case an eye bolt, passes through the track and is threaded into the steel plate which is under the gunwale.
I broke one
Hi John,
If yours is like ours, which I'm sure it probably is, the bolt, in our case an eye bolt, passes through the track and is threaded into the steel plate which is under the gunwale.
I broke one
|
By
Alan Leslie
·
#50289
·
|
|
Re: genoa sheet track end cap/pulley block
Hi John,
I think our genoa track set ups are similar but perhaps yours has been modified or repaired here? I haven't taken on this project yet but it's on my list. Looking at mine, it looks like a
Hi John,
I think our genoa track set ups are similar but perhaps yours has been modified or repaired here? I haven't taken on this project yet but it's on my list. Looking at mine, it looks like a
|
By
Mike Longcor (SV Trilogy)
·
#50288
·
|
|
Re: New Owners - 1996 SM #180
Congrats Jer!
We replaced our old galley fridge last year with an Isotherm CR130EL sourced from Marine Warehouse (we were in Panama at the time but I think they are Florida based). It was a good fit
Congrats Jer!
We replaced our old galley fridge last year with an Isotherm CR130EL sourced from Marine Warehouse (we were in Panama at the time but I think they are Florida based). It was a good fit
|
By
Mike Longcor (SV Trilogy)
·
#50287
·
|
|
genoa sheet track end cap/pulley block
Hi All,
I have finally gotten around to replacing the genoa sheet cars and have hit some unanticipated trouble. Thanks to the Forum I was well prepared for releasing the rail stanchon which went
Hi All,
I have finally gotten around to replacing the genoa sheet cars and have hit some unanticipated trouble. Thanks to the Forum I was well prepared for releasing the rail stanchon which went
|
By
John Clark
·
#50286
·
|
|
Re: Reefing and sail-handling on conventionally rigged Maramu, versus electric furling?
Paul,
Our 1982 Maramu did not have a reefing line or the halyard led to the cockpit. There were winches on the main mast for the halyard and for the reefing lines.
We also wanted the safety of
Paul,
Our 1982 Maramu did not have a reefing line or the halyard led to the cockpit. There were winches on the main mast for the halyard and for the reefing lines.
We also wanted the safety of
|
By
David Wallace
·
#50285
·
|
|
Re: Insurance in Europe
Thanks for that input!
We will certainly shop your recommendations for next year, when our insurance expires in October. We are insured now with Pantaenius USA and would certainly entertain better
Thanks for that input!
We will certainly shop your recommendations for next year, when our insurance expires in October. We are insured now with Pantaenius USA and would certainly entertain better
|
By
Matt Salatino
·
#50284
·
|
|
Re: Insurance in Europe
Hi Cindy and Matt,
in German are second alternativ insurance or broker.
First, there is firmenich-yacht.de and the other is yachtpool.
Yachtpool is since many years my broker and I'm very happy with
Hi Cindy and Matt,
in German are second alternativ insurance or broker.
First, there is firmenich-yacht.de and the other is yachtpool.
Yachtpool is since many years my broker and I'm very happy with
|
By
Ralf Schroeder
·
#50283
·
|
|
Re: Reefing and sail-handling on conventionally rigged Maramu, versus electric furling?
Hi Paul
I currently own a 1985 Maramu but the only rub it is currently in New Zealand. If you are interested contact me directly.
Bill
Hi Paul
I currently own a 1985 Maramu but the only rub it is currently in New Zealand. If you are interested contact me directly.
Bill
|
By
Bill Fletcher
·
#50282
·
|
|
Re: New Owners - 1996 SM #180
Hi Jer,
Have you considered going to Martinique for the upgrades? It might be worth the time. In Le Marin, the Amel people can fix anything quickly and well. The refrigerator and related are
Hi Jer,
Have you considered going to Martinique for the upgrades? It might be worth the time. In Le Marin, the Amel people can fix anything quickly and well. The refrigerator and related are
|
By
Miles
·
#50281
·
|
|
Re: Insurance in Europe
Hello Mark,
Congratulations on your new boat. If you are going to stay in Europe for a few years, I suggest that you look into Pantaenius in Europe. They are an different company and will not
Hello Mark,
Congratulations on your new boat. If you are going to stay in Europe for a few years, I suggest that you look into Pantaenius in Europe. They are an different company and will not
|
By
Miles
·
#50280
·
|
|
Reefing and sail-handling on conventionally rigged Maramu, versus electric furling?
Hello Brain Trust,
We are in the market for a Maramu or Santorin within striking distance of the US East Coast. I have been focused on 1985 or later vessels with electric furling main and genoa, as
Hello Brain Trust,
We are in the market for a Maramu or Santorin within striking distance of the US East Coast. I have been focused on 1985 or later vessels with electric furling main and genoa, as
|
By
Paul Villinski
·
#50279
·
|
|
Re: New Owners - 1996 SM #180
Hello Jeremy,
Eleuthera (SM 007) was probably at your starting point when we bought her...
Now also past new to use your words.
For refrigerator replacement, we went with Frigoboat drawer
Hello Jeremy,
Eleuthera (SM 007) was probably at your starting point when we bought her...
Now also past new to use your words.
For refrigerator replacement, we went with Frigoboat drawer
|
By
Germain Jean-Pierre
·
#50278
·
|
|
Re: Gas struts for windscreens
Hi paul I bought mine from Defender Marine
If you want to replace them because they’re stuck and closed soap them in a bottle of Coca-Cola for 24 hours then hold them and hit the moving in on top
Hi paul I bought mine from Defender Marine
If you want to replace them because they’re stuck and closed soap them in a bottle of Coca-Cola for 24 hours then hold them and hit the moving in on top
|
By
Courtney Gorman
·
#50277
·
|
|
Re: New Owners - 1996 SM #180
Hello Jer;
Welcome to the Amel family. Sounds like you will have some fun times ahead.
My parents live in Marina Del Rey and we are in Malibu. We visit our them often, so when you do get back,
Hello Jer;
Welcome to the Amel family. Sounds like you will have some fun times ahead.
My parents live in Marina Del Rey and we are in Malibu. We visit our them often, so when you do get back,
|
By
Mohammad Shirloo
·
#50276
·
|
|
Re: Gas struts for windscreens
check norelem.de
it was a perfect fit in my case Amel 54/54 Carre d‘As
Pos. Artikelnummer
Bezeichnung Menge Preis PE Wert
Kundenartikelnummer LiefKw
check norelem.de
it was a perfect fit in my case Amel 54/54 Carre d‘As
Pos. Artikelnummer
Bezeichnung Menge Preis PE Wert
Kundenartikelnummer LiefKw
|
By
robin hutter
·
#50275
·
|
|
Re: Gas struts for windscreens
Paul.
I looked everywhere
Lots of misfires. Wrong excursions, compressions etc.
I ended up ordering from Amel. $$ but worth it ultimately.
Porter
A54-152
Excuse the errors.
Sent from my IPhone
Paul.
I looked everywhere
Lots of misfires. Wrong excursions, compressions etc.
I ended up ordering from Amel. $$ but worth it ultimately.
Porter
A54-152
Excuse the errors.
Sent from my IPhone
|
By
Porter McRoberts
·
#50274
·
|