|
Re: Rub Rail insert
Hello Patrick,
I am refitting and Annapolis MD and need new rub rails as well...
I could help defray the cost of your trip if you can handle another suitcase. Not joking... :)
At this rate, we should
Hello Patrick,
I am refitting and Annapolis MD and need new rub rails as well...
I could help defray the cost of your trip if you can handle another suitcase. Not joking... :)
At this rate, we should
|
By
Charles Bell
·
#50781
·
|
|
Re: Flowjet refrigeration pumps overhaul
On this issue.
Had a long conversation with Rob at Costal CLimate. As usual, a very knowledgeable guy.
His thoughts. Flojets are super reliable, AS long as they aren't drawing a lot of current, i.e.
On this issue.
Had a long conversation with Rob at Costal CLimate. As usual, a very knowledgeable guy.
His thoughts. Flojets are super reliable, AS long as they aren't drawing a lot of current, i.e.
|
By
Porter McRoberts
·
#50780
·
|
|
Re: Bottom paint removal problem
You can buy a soda blaster attachment cheaply enough & soda. I got mine for under 300.
Aras
1988 Sharki #163
You can buy a soda blaster attachment cheaply enough & soda. I got mine for under 300.
Aras
1988 Sharki #163
|
By
Aras Grinius
·
#50779
·
|
|
Bottom paint removal problem
I have owned my Super Maramu since she was launched in 2003. Amel applied a hard bottom paint before launch in 2003 but since then I have only used ablative paint. The layer is now thick and a bit
I have owned my Super Maramu since she was launched in 2003. Amel applied a hard bottom paint before launch in 2003 but since then I have only used ablative paint. The layer is now thick and a bit
|
By
Mark Pitt
·
#50778
·
|
|
Re: Rub Rail insert
Pat, I'll rummage through my paperwork and see if I can find the way-bill for the scupper shipment and see if it has a weight (standby). My guess is it would take two large suitcases for the scupper
Pat, I'll rummage through my paperwork and see if I can find the way-bill for the scupper shipment and see if it has a weight (standby). My guess is it would take two large suitcases for the scupper
|
By
Gary Silver
·
#50777
·
|
|
Re: Rub Rail insert
Hi Pat,
I took my davits as baggage on a flight from NZ to Ft Lauderdale so I wouldn't think the bumper would be a problem. It doesn't need to be in a suitcase, I just wrapped the dismantled
Hi Pat,
I took my davits as baggage on a flight from NZ to Ft Lauderdale so I wouldn't think the bumper would be a problem. It doesn't need to be in a suitcase, I just wrapped the dismantled
|
By
Danny and Yvonne SIMMS
·
#50776
·
|
|
Re: Headsets
#solution
Thanks, Joerg, another viable option.
I see they are not waterproof. I guess that isn't a problem? More expensive than the two Sena headsets that are wAter resistant.
Kent
Thanks, Joerg, another viable option.
I see they are not waterproof. I guess that isn't a problem? More expensive than the two Sena headsets that are wAter resistant.
Kent
|
By
karkauai
·
#50775
·
|
|
Re: Flowjet refrigeration pumps overhaul
Thanks Jamie. Yes I have been following this thread about alternatives and wait in anticipation! I have not heard about anyone successfully refurbishing the flowjet.
Cheers,
Paul
S/Y Ya Fohi -
Thanks Jamie. Yes I have been following this thread about alternatives and wait in anticipation! I have not heard about anyone successfully refurbishing the flowjet.
Cheers,
Paul
S/Y Ya Fohi -
|
By
Paul Dowd and Sharon Brown
·
#50774
·
|
|
Re: Headsets
#solution
I have had the Eartec headsets for one season and they work great - no issues. A friend of mine has had them for 3 years - again, no issues. The only draw back is that you have to remove the
I have had the Eartec headsets for one season and they work great - no issues. A friend of mine has had them for 3 years - again, no issues. The only draw back is that you have to remove the
|
By
Joerg Esdorn
·
#50773
·
|
|
Re: Flowjet refrigeration pumps overhaul
Lots of anticipation for this. Thanks Jamie.
Porter
A54-152 IBIS
Excuse the errors.
Sent from my IPhone
Www.fouribis.com
Lots of anticipation for this. Thanks Jamie.
Porter
A54-152 IBIS
Excuse the errors.
Sent from my IPhone
Www.fouribis.com
|
By
Porter McRoberts
·
#50772
·
|
|
Re: Flowjet refrigeration pumps overhaul
Paul, as you have probably read in another long thread about this very subject, you are not alone. Several of us are trying to come with a viable solution that we can all use to deal with these
Paul, as you have probably read in another long thread about this very subject, you are not alone. Several of us are trying to come with a viable solution that we can all use to deal with these
|
By
Jamie Wendell
·
#50771
·
|
|
Re: Rub Rail insert
Danny, I was only sort of joking when I wrote back to Gary,a couple of hours ago, but since then we are really considering a vacation to France . We could save enough on shipping to pay for airfare
Danny, I was only sort of joking when I wrote back to Gary,a couple of hours ago, but since then we are really considering a vacation to France . We could save enough on shipping to pay for airfare
|
By
Patrick McAneny
·
#50770
·
|
|
Re: Headsets
#solution
Thanks Davi,
+1 for Sena!
Kent Robertson
S/V Kristy
karkauai@...
USA cell: 828-234-6819
Hey there, I don't use a headset, but did for a decade while motorbiking. Sena never let me down. I used the
Thanks Davi,
+1 for Sena!
Kent Robertson
S/V Kristy
karkauai@...
USA cell: 828-234-6819
Hey there, I don't use a headset, but did for a decade while motorbiking. Sena never let me down. I used the
|
By
karkauai
·
#50769
·
|
|
Re: Headsets
#solution
Hey there, I don't use a headset, but did for a decade while motorbiking. Sena never let me down. I used the SMH10s for nonstop music and talking and phone calls for most of that decade, the same
Hey there, I don't use a headset, but did for a decade while motorbiking. Sena never let me down. I used the SMH10s for nonstop music and talking and phone calls for most of that decade, the same
|
By
Davi Rozgonyi
·
#50768
·
|
|
Re: A55: fresh water pump system
In my experience, there has to be nothing wrong to create this condition. I’ve had this happen on my boat when I get back after many months away. Or if the tank was run very low. Pump up the
In my experience, there has to be nothing wrong to create this condition. I’ve had this happen on my boat when I get back after many months away. Or if the tank was run very low. Pump up the
|
By
Joerg Esdorn
·
#50767
·
|
|
Re: SM2000 - Have you replaced your dishwasher by a fridge/freezer?
#galley
You need to get that from Eric
CW Bill Rouse
You need to get that from Eric
CW Bill Rouse
|
By
CW Bill Rouse
·
#50766
·
|
|
Re: A55: fresh water pump system
Stewart,
I am not sure. Maybe someone else will have experienced this.
Stewart,
I am not sure. Maybe someone else will have experienced this.
|
By
CW Bill Rouse
·
#50765
·
|
|
Re: A55: fresh water pump system
Hello again Bill,
We have noticed that the overflow is not overflowing when we fill the tank and it appears that the overflow is blocked in some way.
If it is then this could , I presume , affect
Hello again Bill,
We have noticed that the overflow is not overflowing when we fill the tank and it appears that the overflow is blocked in some way.
If it is then this could , I presume , affect
|
By
Stuart Hemingway <stuart@...>
·
#50764
·
|
|
Re: Rub Rail insert
Pat, I am sure you will enjoy La Rochelle regardless of how much transport you save. Count that a bonus. And then you get to see the Amel facility. The waterfront is a huge line of waterfront
Pat, I am sure you will enjoy La Rochelle regardless of how much transport you save. Count that a bonus. And then you get to see the Amel facility. The waterfront is a huge line of waterfront
|
By
Danny and Yvonne SIMMS
·
#50763
·
|
|
Re: SM2000 - Have you replaced your dishwasher by a fridge/freezer?
#galley
I have some pictures on my blogg
This is link to my first version with a metal lining, in Swedish but some pictures
https://sykerpa.com/2016/06/12/hart-vader-och-hart-arbete/
My next job was to
I have some pictures on my blogg
This is link to my first version with a metal lining, in Swedish but some pictures
https://sykerpa.com/2016/06/12/hart-vader-och-hart-arbete/
My next job was to
|
By
Paul Osterberg
·
#50762
·
|