I'm also really interested to find a headliner match - if anyone knows a close one thinking of doing my aft cabin roof at some point soon All the best Miles Maramu #162

Hydrovane works excellently for us on SeaLove I think the bigger of the WindPilot range (the pacific 2?) also works on the same principles - ie you lock your rudder and the vane takes over probably

Hi Mat, The water heaters were installed by professionals that were sent by the factory. It is something else... The leakage was from the tank . Ofer Magen

Joel, Would you by chance know of a source for the exact headliner material and adhesive that Amel has been using since 1996? Thanks for the background on this issue. James SV Sueno Maramu #220

Just a thought. If you have a leak on the suction side it will allow air to enter the water pipes and this won't compress enough to reach the shut off pressure. Michael. Nebo sm251 Sent from Yahoo7

Many times, I’ve heard of people causing leaks in water heaters from overtightening plumbing connections. ~~~⛵️~~~Matt

Fantastic Miles Great information and User Verified. Even though I have a new monitor, the hydrovane is the set up I desire. Many thanks Martin Hameline VoileOVent 129

Hi to all, Few month after buying my boat in 2015, i had a leakage from the inside part of the water heater. I bought a new one from isotherm ,the same model -basic 40. Since then , 3 more boilers

hi there Martin I am a big fan of windvanes and put one on our maramu last year on my old boat (30ft) we had a monitor this time we chose a hydrovane as we used on on a family boat before and they are

Hi Mitchell, Were you able to go through the pictures in the "C-Drive - Technical " photo album? You'll see my unit with the fairing material cut away. That exposes the cover plate on the front of the

Hello I just bought an Amel Maramu in Martinique and am selling my Rafiki 37 in San Diego. I have a new Monitor Windvane and am thinking I should transfer it to the Maramu. Scanmar of Monitor says

It has come to my attention that I made a mistake when I represented that all the Amel boats built after 2006 have the desired spun cotton/felt backing on the vinyl overhead instead of the

Hi all, My main furler appears to have a rubber “plug” fitted inside the driving hub such that the lower bolt goes through this and only the upper bolt goes through the foil. See attached

Thanks Craig, also was it difficult knowing where to cut the GRP on the lower unit? Are there any bolts I need to undo within the lower unit to remove the prop shaft? Did you resin the piece back you

Danny Yes, we have instructed our listing agent in London to take the advert down next week. She is no longer for sale. These are great boats and fast becoming classics now, and in our case, Island

Hi Mitchell, I did leave the upper unit attached to the trumpet and lifted the whole assembly together. But if you can get a lifting line around the trumpet itself that may work just fine. I recall

Hi there Our Maramu has a Raymarine type 2 with a hole cut into the door through which it protrudes. It works well and looks ok I find the noise of the autopilot rather tiresome though so use a

Stuart, I gave you all of my ideas. Like I said before I don't think the accumulator tank pressure has anything to do with a continuous running pump. Best, CW Bill Rouse Amel Owners Yacht School +1

I have a pair of ceecoach since 3 years and they work perfect for me. Maybe you have a look https://www.peiker-cee.de/en Fair winds Dieter Fal-lera Sharki #135 Von:

Hi M & A, Their prices seem scary at first but if you divide by 2, you get about GBP pricing. Cheers, Jean-Pierre Germain jp.germain45@...