Hi Mohammad, Coming back to your 5 questions, here are my 5 cents: 1. Good 2. The 340 works well on my Simpson Davits. I lift it with my 15HP Yamaha on. 3. I had the 340 on the sundeck without

A couple of unsolicited thoughts on the Mantus bridle andequipment: We purchasedthe 3/4” bridle version when we first started cruising. It was used maybetwice. I stopped using it because the

Hello Karen Smith, From your reply regarding your Mantus anchoring equipment for SM Harmonie. I have decided to upgrade to the 47kg Mantus anchor, as you have. With regard to your other Mantus

Hi Bill, Just to put some additional pictures with your story The original pump as found on our Amel (hull 121) is the one in picture 1. It has the code A092819C like the one you specified. Our boat

There is a typo in my original email. The Frigoboat number for the Flowjet pump is A092819C

As owners of water-cooled Frigoboat refrigeration are aware, the Frigoboat 12 volt saltwater pump marked VECO A092319C is actually made by Flojet and is a Flowjet 4105-512 12 volt seawater pump.

About a year and a half ago, we insured Cream Puff with Y-Yacht in the UK after Pantaenius rewrote the Caribbean policy to a point of being ridiculous. Many people spoke very highly of Y-Yacht and so

I am a new owner and just purchased in December 2019. Pantaenius gave me a very reasonable quote and insured my boat for US east coast. Policy dates effective Dec 19-Dec 2020. I wonder what the terms

HI Mitchell - my pleasure; glad it helped. Regarding the design, one of my pictures show the manufacturers label on the upper unit - it was CATEP France with a Model and serial number. A google search

Hi Craig, I managed to get it all out and have cut back the GRP to access the bearings. Of interest my lower unit is different from yours with 6 hex screws holding the thrust bearing housing. Thanks

Karen Smith, Novamar...that's interesting. We received a non-renewal letter from them three weeks ago. It said the non-renewal was due to changes in their Underwriting. Since we are headed back to

Hi. A PO left a spray can of vinyl adhesive on board. Whetever the odd corner has drooped it has been very efective. A quick squirt on the offending portion. Slap it up and it stays

Ah, ok, well that’s good t know, thanks. Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada Paul Dowd Managing Director FGPS International DWC LLC UAE: +971 (0)567 841 061 UK: +44

Try Anjo in Antigua if it’s only the Caribbean are you want. Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada

Hi Karen, I too went with a Jackline policy. But good golly the premium is crazy. I am relocating to St Thomas in the next month and will be spending some quality time looking for a better

Yes same thing. They wouldn't even consider underwriting. They said they are not insuring boats in US ARAS SHARKI#163

Thanks! I think we’ll do the same.

Hi Eric, we had the same issue and went to https://www.yyachtinsurance.com/ from the UK. -- Michael & Robyn SY RIPPLE SM2K # 417

Paul, Sorry to hear that you are having some vinyl adhesion problems on your 54. As I understand things, the toxicity is an issue with the older polyurethane foams used in the vinyl headliners so

Eric, I received my non-renewal letter from Pantaenius USA in November for a February renewal date. It seems that Allianz, their major underwriter, decided to exit the US marine market. Our new