Scott, I have the antenna on starboard side of solar arch. The NEW ZEALAND marine electrician ran the cable thru the starboard conduit to the nav station. Unit is in a IRIDIUM GO bracket at the

Thanks Karen. Consider me interested, and let me know how things progress. Steve Aloha SM 72 Hawaii

Hi Dan would you mind sending me a picture of your outboard I like the way it is secured also did you add any reinforcement to the board it is attached to? Cheers Courtney Trippin

Hi Alan, Thanks for the reply. Agree that NEW CALEDONIA is NO problem at all. I sailed for about 18 months around NC (still own a mooring there😊); during 2018 had a bunch of AMEL parts come

Tom Peacock SM Aletes #240 Carriacou

I mounted ours in a corner under the hard dodger. The little bit of fiberglass does not seem to interfere with reception.

Hi Scott, here is a picture of my antenna mount, the wire pass thru the deck with compression fitting, and the inside mount by the nav station. I used an existing hole in edge of the deck. I also

I use “Black Streak Remover”. Takes it right off with just a bit of hand-polishing. It works great. There are several brands available; I’ll be aboard on Saturday and will reply further with

I know it has been done by many on this forum. Can you please chime in on what it cost to have your headliners professionally replaced. thank you Chip

Alexandre, Nikimat was one of my inspirations for buying into the AMEL world. I remember seeing it after the Hurricane in a you tube video it was sad to see. I have wondered what became of her. Take

Bob, Removal of the wood panels was one of my concerns as well. Fortunately there was some relatively recent discussion on the boards that indicated that the panels are fastened in with the bolts

Hi all, We just scored a great deal on a used Iridium Go with the external antenna. It comes with 12m of antenna cable and the mount for steel tubes.

Like Peter, I have zero black soot on my A54. -- Scott 2007 A54 #69 SV Tengah http://www.svtengah.com

All, We are scheduled to transit the Panama Canal today and I'm trying to be extra careful with respect to covering the panels to avoid damage by the monkey fists thrown by the canal advisors. Our

Good morning, I am back in Sint Maarten and putting the rest of my boat parts for sale. Just posted information on my Genoa, Main and Like New Mizzen. You can read the information on the Share

On my older SM6 I had the drooping headliner problem. My 1st fix was the wood strips idea screwed in to hold up the sagging areas. It looked good and lasted about 10 years before I had to start

Stuart Congratulations Looks like you are well on your way to fixing this problem. All the Best, Paul Stascavage S/V Rita Kathryn SM #466 RitaKathryn.com Currently Cruising Bahamas

Dear Carina, I’m glad you are still going well - just for interest we did not have the black exhaust spot problem so I wonder if it is your engine or fuel combination? We used additives many

Hi Teun, I can't help you with Customs Broker in Brisbane, but I would think that pretty much any customs broker would be able to do it for you. Just FYI, in New Caledonia, when you arrive and clear

Thank you Michael, Where would you back connect the hose to please? Stuart On 3 Mar 2020, at 19:50, michael winand via Groups.Io <mfw642000@...> wrote: