Hi all, thank you for your replies! We didnt have this problem in Europé/Caribbean but in Pacific it started. Last year in NZ we renovated the injectors on both engines since we thought that might

Evening Penny & Bob, Just called WALLACE International as you suggested. Asked for Bob and after being screened by 2 people who were clearly not very keen to let me talk to Bob😊 –until I

Hi Penny & Bob, Greatly appreciate your help. I will try to get in touch with Bob WALLACE as my exchange with: Ryan Knaggs Wallace International 130 Riverside Place Morningside QLD

Hi Pat, I do not remember the name. I will try to get the name for you tomorrow. It took 2 yard workers 4 days to strip and sand. It is best applied in a warm environment as it is a chemical

Hi Teun, I have just got back online after crossing and see you are wanting to get some bits for boat in transit in Queensland. Ask to speak to “Bob Wallace” at Wallace International in Bris. If

Hi Dan I think you'll find that bracket is standard on Amel Super Maramus. Every one I've seen, including ours, has it. Cheers Alan Elyse SM437

Ours is mounted deep under the Nav station desk (with external antenna). No problem with GPS signal ever. Just FYI. Porter McRoberts S/V IBIS a54-152 Excuse the errors. Sent from my IPhone

The main unit should be installed in a position in the cabin where it will have GPS reception i.e. high in the cabin and near a window. The external antenna repeats the Iridium signal but not the GPS

Eric, I need to remove 20 some years of paint. Do you remember the name of the product you bought from Home Depot ? Was it meant to be used on fiberglass? Have any idea as to the man hours to strip

This is the stuff I initially recommended—I now get little to no soot. Fair Winds Eric Amel Super Maramu #376

I would start from the furthest cold water tap. Disconnect the fixture and connect a hose that you can use the dock water. Disconnect the hose from the pump. Put a hose into a bucket so that you can

I just ordered last week the Reckmann furlers. Did as good as possible research on both options and found out that even when the Reckmann are almost double the price compared to Bamar that Reckmann

Thanks Dan what type of sailing are you comfortable with it there? Cheers and many thanks

Hi Dan We have an identical bracket on Ocean Pearl. I always thought it was an Amel standard fixture. Regards Danny SM 299 Ocean Pearl

Courtney, here are some more photos of the engine bracket. I have seen it on other Amels. The wood is a real Marine laminate. There are two SS straps that giver the top rail and hold it all

Good afternoon Randall, Thank you so much, I am very flattered and extremely honored by your message. Today being my birthday, it is one of the nicest message I could receive. Sincerely,

Scott, I reread your message and saw you have your panels in parallel - do you have blocking diodes at each panel? These would be necessary to prevent current in your open-circuit situation. If you

Hi Scott, open circuiting the panels, as you said, means no current and no hotspots/damage. just wanted to clarify, the switches are between the panels and charge controllers, NOT between the

Dear Carina, Also use additive in my fuel – don’t have (much) soot at all but that might be bcoz I have the D3 H version which apparently runs more efficient than the D3 C. The soot I do have

Scott, I have the antenna on starboard side of solar arch. The NEW ZEALAND marine electrician ran the cable thru the starboard conduit to the nav station. Unit is in a IRIDIUM GO bracket at the